Garmin GPSMAP 3210 Owner's Manual - Page 72
Garmin Data Transfer, Garmin, Data Transfer, NMEA In/NMEA Out, NMEA High Speed, Lat/Lon - installation manual
UPC - 753759053062
View all Garmin GPSMAP 3210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Main Menu Main Menu > System Tab Port 1 • Garmin Data Transfer-the proprietary format used to upload or download MapSource data, exchange waypoint, route, track, and proximity data with a computer or another Garmin unit. When you select Garmin Data Transfer, you can choose from nine Garmin Data Transfer Modes. • NMEA In/NMEA Out-supports the input or output of standard NMEA 0183 data, DSC, and sonar NMEA input support for the DPT, MTW, and VHW sentences. You can also adjust the NMEA output. • NMEA High Speed-supports the input or output of standard 0183 data for most AIS receivers. • None-provides no interfacing capabilities. Port 2 • NMEA In/NMEA Out-supports the input or output of standard NMEA 0183 data, DSC, and sonar NMEA input support for the DPT, MTW, and VHW sentences. You can also adjust the NMEA output. • None-provides no interfacing capabilities. You can also adjust the NMEA output to enable or disable certain sentences and adjust the number of Lat/Lon output precision digits. You must have one of the ports set to NMEA In/NMEA Out to use this option. Settings affect both Port 1 and Port 2 NMEA outputs. Network You can select the method to upload or download user data on networked MFDs. • Merge User Data-merges the user data for all MFDs on each MFD. • Clone User Data-the user data from the MFD initiating the clone replaces the user data on all other MFDs attached to the network. NMEA Interface If you are going to use the GPSMAP 3206/3210 with a NMEA device (such as a radio or autopilot), the unit needs to be set to input/output NMEA data. See the GPSMAP 3206/3210 & GPS 17 Installation Instructions for information on wiring and NMEA data. To activate the NMEA data: 1. Highlight the Port 1 or Port 2 field, and press ENTER. 2. Highlight NMEA In/NMEA Out, and press ENTER. When transferring data between two Garmin units, always set one to Host and use the other unit to send or request the data. Advanced NMEA Output Setup The GPSMAP 3206/3210 NMEA data transmission can be customized to change the precision of the Lat/Lon minutes, set up the waypoint IDs, and keep the output rate at two seconds. If the unit is set up to output all of the available NMEA sentences, the output rate may exceed two seconds. 64 GPSMAP 3206/3210 Owner's Manual