HP 1600 HP Color LaserJet 1600 - User Guide - Page 83
Cleaning the printer, To clean the fuser using HP Toolbox, Troubleshooting, Maintenance, Cleaning
UPC - 882780316614
View all HP 1600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
Cleaning the printer During the printing process, paper, toner and dust particles can accumulate inside the printer. Over time, this buildup can cause print-quality problems such as toner specks or smearing. This printer has a cleaning mode that can correct and prevent these types of problems. To clean the fuser using HP Toolbox NOTE Use the following procedure to clean the fuser using the HP Toolbox. To clean the engine when the computer is running an operating system that does not support HP Toolbox, see the late-breaking Readme on the root of the CD-ROM, or visit http://www.hp.com/support/clj1600. 1. Make sure that the printer is turned on and in the Ready state. 2. Open the HP Toolbox. 3. On the Troubleshooting tab, click Maintenance, click Cleaning Page and then click Print. A page with a pattern prints from the printer. 4. At the printer, remove any print media in Tray 2 or optional Tray 3. 5. Remove the page that printed and load it face-down into Tray 2 or optional Tray 3. 6. At the computer, press Clean. ENWW Cleaning the printer 71