HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 3 - IP Routing Confi - Page 224
Configuring a priority for OSPFv3, Configuring OSPFv3 route redistribution, Command, Remarks
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 224 highlights
Step 1. Enter system view. 2. Enter OSPFv3 view. Command system-view ospfv3 [ process-id ] 3. Specify the maximum number maximum load-balancing of ECMP routes. maximum Remarks N/A N/A Optional. 8 by default. Configuring a priority for OSPFv3 A router may run multiple routing protocols. The system assigns a priority to each protocol. When these routing protocols find the same route, the route found by the protocol with the highest priority is selected. To configure a priority for OSPFv3: Step 1. Enter system view. 2. Enter OSPFv3 view. 3. Configure a priority for OSPFv3. Command system-view ospfv3 [ process-id ] preference [ ase ] [ route-policy route-policy-name ] preference Remarks N/A N/A Optional. By default, the priority of OSPFv3 internal routes is 10, and priority of OSPFv3 external routes is 150. Configuring OSPFv3 route redistribution Follow these guidelines when you configure OSPFv3 route redistribution: • Executing the import-route or default-route-advertise command on a router makes it become an ASBR. • You can only inject and advertise a default route using the default-route-advertise command. • Because OSPFv3 is a link state routing protocol, it cannot directly filter LSAs to be advertised. You must filter redistributed routes first. Routes that are not filtered out can be advertised in LSAs into the routing domain. • Using the filter-policy export command filters routes redistributed with the import-route command. If the import-route command is not configured, executing the filter-policy export command does not take effect. To configure OSPFv3 route redistribution: Step 1. Enter system view. 2. Enter OSPFv3 view. 3. Specify a default cost for redistributed routes. 4. Redistribute routes from another protocol, or another OSPFv3 process. Command Remarks system-view N/A ospfv3 [ process-id ] N/A default cost value Optional. 1 by default. import-route protocol [ process-id | allow-ibgp ] [ cost value | route-policy route-policy-name | type type ] * Not configured by default. 214