HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 3 - IP Routing Confi - Page 296
On PE 1, con VPN instances, Bind VLAN-interface 10 with VPN instance
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 296 highlights
[MCE] ip vpn-instance vpn2 [MCE-vpn-instance-vpn2] route-distinguisher 20:1 [MCE-vpn-instance-vpn2] vpn-target 20:1 [MCE-vpn-instance-vpn2] quit # Create VLAN 10, add port GigabitEthernet 1/0/1 to VLAN 10, and create VLAN-interface 10. [MCE] vlan 10 [MCE-vlan10] port gigabitethernet 1/0/1 [MCE-vlan10] quit [MCE] interface vlan-interface 10 # Bind VLAN-interface 10 with VPN instance vpn1, and configure an IP address for VLAN-interface 10. [MCE-Vlan-interface10] ip binding vpn-instance vpn1 [MCE-Vlan-interface10] ip address 10.214.10.3 24 # Configure VLAN 20, add port GigabitEthernet 1/0/2 to VLAN 20, bind VLAN-interface 20 with VPN instance vpn2, and specify an IP address for VLAN-interface 20. [MCE-Vlan-interface10] quit [MCE] vlan 20 [MCE-vlan20] port gigabitethernet 1/0/2 [MCE-vlan20] quit [MCE] interface vlan-interface 20 [MCE-Vlan-interface20] ip binding vpn-instance vpn2 [MCE-Vlan-interface20] ip address 10.214.20.3 24 [MCE-Vlan-interface20] quit # On PE 1, configure VPN instances vpn1 and vpn2, specify an RD and route targets for each VPN instance. system-view [PE1] ip vpn-instance vpn1 [PE1-vpn-instance-vpn1] route-distinguisher 30:1 [PE1-vpn-instance-vpn1] vpn-target 10:1 [PE1-vpn-instance-vpn1] quit [PE1] ip vpn-instance vpn2 [PE1-vpn-instance-vpn2] route-distinguisher 40:1 [PE1-vpn-instance-vpn2] vpn-target 20:1 [PE1-vpn-instance-vpn2] quit 2. Configure routing between the MCE and VPN sites: The MCE is connected to VPN 1 directly, and no routing protocol is enabled in VPN 1. Therefore, you can configure static routes. # On VR 1, assign IP address 10.214.10.2/24 to the interface connected to MCE and 192.168.0.1/24 to the interface connected to VPN 1. Add ports to VLANs correctly. (Details not shown.) # On VR 1, configure a default route with the next hop as 10.214.10.3. system-view [VR1] ip route-static 0.0.0.0 0.0.0.0 10.214.10.3 # On the MCE, configure a static route to 192.168.0.0/24, specify the next hop as 10.214.10.2, and bind the static route with VPN instance vpn1. [MCE] ip route-static vpn-instance vpn1 192.168.0.0 24 10.214.10.2 # On the MCE, display the routing information maintained for VPN instance vpn1. 286