HP Color LaserJet 4730 HP Color LaserJet 4730mfp - User Guide - Page 276
ADF Output Bin Full, 8X.YYYY EMBEDDED
View all HP Color LaserJet 4730 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 276 highlights
Control panel message turn off then on 8X.YYYY EIO X ERROR 8X.YYYY EMBEDDED JETDIRECT ERROR [FS] FILE OPERATION FAILED To clear touch "OK". alternates with Ready [FS] NOT INITIALIZED [FS] NOT INITIALIZED To clear touch "OK". alternates with ABCDEFGHIJYW 011000000000 alternates with To exit press Stop Access Denied MENUS LOCKED ADF Cover Open ADF Output Bin Full ADF Paper Jam Description Recommended action The I/O accessory card in slot X has encountered a critical error. X Description 1: error in slot 1 1. Turn the MFP off then on. 2. If the problem persists, contact HP Support at http://www.hp.com/ support/clj4730mfp. 2: error in slot 2 This message is generated by a failure of the Turn the MFP off then on. Press for more embedded JetDirect print server. information. If the message persists, contact HP Support at http://www.hp.com/support/clj4730mfp. The MFP received a PJL file system 1. command that attempted to perform an illogical operation (for example, to download 2. a file to a non-existent directory). To clear the message, touch OK. If the message persists, turn the MFP off then on. 3. If the message reappears, there may be a problem with the software application. The device has not been initialized. You can use Web JetAdmin to initialize the device. The Flash file system has not been initialized. Touch OK to continue. It must be initialized before it can be used. This message is displayed when a paper path sensor test or a paper path test is run. The alphabetical value indicates which sensor is being checked. No action necessary. An attempt has been made to modify a menu item while the control panel security mechanism is enabled by the MFP administrator. The message will disappear shortly, and the MFP will return to Ready state. Contact the MFP administrator to change settings. The ADF cover is open. Close the ADF cover. Follow the instructions in the onscreen dialog box. The ADF output bin holds 50 sheets of paper. Remove the paper from the ADF output bin. The MFP stops when the bin is full. Paper is jammed in the ADF. Follow the instructions in the onscreen dialog box. For more information, see Clearing jams. 256 Chapter 12 Solving problems ENWW