HP Color LaserJet 4730 HP Color LaserJet 4730mfp - User Guide - Page 50

Table 1-1 HP Color LaserJet 4730mfp (continued) Item Details ● If the fax accessory is installed, the modem status reads Operational/Enabled. ● On the Embedded JetDirect Page, verify that the status reads I/O Card Ready and that you have a valid IP address. Verify you can copy from the copier glass of the Place configuration page face down on copier MFP. glass and press Start. Verify you can copy from the Automatic Document Feeder (ADF). Place configuration page face up in ADF and press Start. Verify you can send a fax from the MFP. Place document face up in the ADF and use the key pad to send to a known functioning fax number. Verify you can send an e-mail. Place document face up in the ADF, use keypad to enter e-mail address (LDAP must be configured for this to function). Verify you can print to the MFP. After loading the printing system software on a networked computer, print a test page from the driver. Verify the date and time are set. The MFP will not print until the date and time have been set. See Setting the real-time clock for more information. Verify that all users have access to the User Training. http://www.hp.com/go/usemymfp 30 Chapter 1 MFP basics ENWW