HP Color LaserJet 4730 HP Color LaserJet 4730mfp - User Guide - Page 282
Internal Disk Not Functional, Jam In Document Feeder
View all HP Color LaserJet 4730 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 282 highlights
Control panel message Internal disk initializing INTERNAL DISK NOT FUNCTIONAL Internal disk spinning up JAM IN DOCUMENT FEEDER LOAD TRAY 1: For help press LOAD TRAY 1: To continue touch "OK". alternates with LOAD TRAY 1: For help press LOAD TRAY 1: To use another tray touch OK Alternates with LOAD TRAY 1: Description Recommended action EIO X DISK = removable hard disk installed in EIO slot X The internal disk device is initializing. No action necessary. The internal disk is not working correctly. Turn the MFP off then on. If the error persists, contact HP Support at http://www.hp.com/ support/clj4730mfp. The internal disk is spinning up. This message generally appears for approximately 15 seconds when the MFP emerges from sleep mode. Jobs can still print, but jobs that require disk access, such as quick copy jobs, must wait until the disk is initialized. No action necessary. Paper is jammed in the ADF. Remove jammed paper from the ADF. Follow the instructions in the onscreen dialog box. For more information, see Clearing jams. If the message persists after all jams have been cleared, a sensor might be stuck or broken. Contact an HP-authorized service or support provider. See the HP support flyer, or go to http://www.hp.com/suppport/ clj4730mfp. This message appears when Tray 1 is 1. selected but is not loaded, and no other paper trays are available for use. 2. Load the correct paper in Tray 1. Confirm that the media guides are in the correct position. 3. If prompted, confirm the size and type of paper loaded. Tray 1 is loaded and configured for a type and 1. If the correct paper is loaded, touch size other than the one specified in the job. OK. 2. Otherwise, remove the incorrect paper and load Tray 1 with the specified paper. 3. If prompted, confirm the size and type of paper loaded. 4. Confirm that the media guides are in the correct position. 5. To use another tray, remove paper from Tray 1 and then touch OK. This message appears when Tray 1 is selected but is not loaded, and other paper trays are available for use. 1. Load the correct paper in Tray 1. 2. Confirm that the media guides are in the correct position. 3. If prompted, confirm the size and type of paper loaded. 4. To use another tray, remove paper from Tray 1 and then touch OK. 262 Chapter 12 Solving problems ENWW