HP Color LaserJet 4730 HP Color LaserJet 4730mfp - User Guide - Page 81

Item RESET SECURITY Options YES NO* LINK SPEED AUTO 10T HALF 10T FULL 100TX HALF 100TX FULL Values Explanation RESET SECURITY: Specifies whether the current security settings on the print server are saved or reset to factory defaults. The print server will automatically configure itself to match the network link speed and communication mode. If this process fails, either 100TX HALF or 10T HALF is set. 10T HALF: 10 Mbps, half-duplex operation. 10T FULL: 10 Mbps, full-duplex operation. 100TX HALF: 100 Mbps, half-duplex operation. 100TX FULL: 100 Mbps, full-duplex operation. Resets submenu To gain access to this menu, touch CONFIGURE DEVICE, and then touch RESETS. NOTE Use this menu with caution. You can lose buffered page data or MFP configuration settings when you select these items. Reset the MFP only under the following circumstances: ● You want to restore the MFP default settings. ● Communication between the MFP and computer has been interrupted, and you are not able to resolve the problem by any other method. See Solving network connectivity problems. ● You are having problems with a port. The items in the Resets submenu will clear all memory in the MFP, while pressing the Reset button clears only the current job. Item RESTORE FACTORY SETTINGS SLEEP MODE Values No value to select OFF ON* Explanation This item restores all control-panel settings to the original factory settings. Turns sleep mode on or off. Using sleep mode offers the following advantages: ● Minimizes the amount of power that the MFP consumes when it is idle ● Reduces wear on electronic components in the MFP The MFP automatically exits sleep mode when you send a print job, receive a fax, touch any button on the control panel, touch ENWW Configure device menu 61