HP Color LaserJet 4730 HP Color LaserJet 4730mfp - User Guide - Page 281
To Load Fonts/data, Insert Or Close
View all HP Color LaserJet 4730 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 281 highlights
Control panel message INCORRECT SUPPLIES For status touch "OK". The supplies gauge will display the consumption levels of print cartridges. Initializing permanent storage Initializing... INSERT OR CLOSE TRAY X For help press INSTALL FUSER INSTALL SUPPLIES For status touch "OK". The supplies gauge will display the consumption levels of print cartridges. INSTALL TRANSFER UNIT INSUFFICIENT MEMORY TO LOAD FONTS/DATA For help press alternates with Device To continue touch "OK". Description Recommended action At least one supply item is incorrectly 1. positioned in the MFP and another supply item is missing, incorrectly placed, out, or low. 2. Touch OK to access the SUPPLIES STATUS menu. Use the scroll bar to highlight the specific supply that has a problem. 3. Press to view help for the supply. 4. Use the scroll bar to step through the instructions. Displayed when the MFP is turned on to show No action necessary. that permanent storage is being initialized. This message is displayed when the MFP is No action necessary. turned on, as soon as the individual tasks begin initialization. Tray X must be inserted or closed before the Close the tray indicated. current job can be printed. The fuser is not installed or is not installed correctly. 1. Confirm that the fuser is installed in the MFP and is fully seated. 2. Use the scroll bar to step through the instructions. At least one supply item is missing or is not 1. correctly seated in the MFP and another supply item is missing, incorrectly placed, out, or low. Insert the supply item or make 2. sure the installed supply item is fully seated. 3. Press Menu to access the SUPPLIES STATUS menu. Touch INFORMATION. Use the scroll bar to highlight the specific supply that has a problem. 4. Press to view help for the supply. 5. Use the scroll bar to step through the instructions. The transfer unit is not installed or is not installed correctly. 1. Use the scroll bar to access the SUPPLIES STATUS menu. 2. Scroll to and select the transfer unit. 3. Press to view help. 4. Use the scroll bar to step through the instructions. The device does not have enough memory to 1. load the data, such as fonts or macros from the location specified. Device can be one of the following: 2. INTERNAL = ROM directly on the formatter board To use the device without the data, touch OK. To solve the problem, add more memory to the device. DDR SDRAM Memory: 128MB, (Q2630A) or 256MB (Q2631A). CARD SLOT X = font card in slot X DIMMS ENWW Control panel messages 261