HP Color LaserJet 4730 HP Color LaserJet 4730mfp - User Guide - Page 277
CARD SLOT X NOT, Check Cables Check Scanner
View all HP Color LaserJet 4730 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 277 highlights
Control panel message ADF Pick Error ADF Skew Error Attachment Too Big BAD DUPLEXER CONNECTION alternates with For help press BAD OPTIONAL TRAY CONNECTION Calibrating... Canceling... X CARD SLOT X NOT FUNCTIONAL Check Cables Check Cables Check Scanner Check Output Device ENWW Description Recommended action The ADF experienced an error while picking Make sure that your original contains no more paper. than 30 pages. Follow the instructions in the onscreen dialog box. Paper is skewed in the ADF. Make sure that the paper guides are aligned on the sides of the originals, and that all of the originals are the same size. Remove the remaining paper from the ADF and close the ADF cover. Follow the instructions in the onscreen dialog box. The scanned documents have exceeded the size limit of the server. Send the job again using a lower resolution, smaller file size settings, or fewer pages. See Using the embedded Web server to learn how to reduce the size of the attachment. Contact the network administrator to enable sending the scanned documents by using multiple e-mails. The duplexer is not connected properly and must be reinserted before printing can continue. Turn the MFP off. Use the scroll bar to step through the instructions. If the error does not clear, record the message and contact HP Support at http://www.hp.com/support/clj4730mfp. The 500-sheet input tray is not making proper 1. connection with the MFP. 2. Verify that the MFP is on a level surface. Turn the MFP off. 3. Reseat the MFP on the 500-sheet input tray. 4. Turn the MFP on after reseating the 500-sheet input tray. The MFP is calibrating. No action necessary. The MFP is in the process of canceling a job. The message will continue to be displayed while the job is stopped, the paper path flushed, and any remaining incoming data on the active data channel is received and discarded. No action necessary. The flash card in slot X is not working correctly. 1. Turn the MFP off. 2. Remove the card from the slot indicated and replace with a new card. The cable that connects the scanner to the MFP is experiencing an error. Make sure that the cable between the scanner and the MFP is connected. Turn the MFP off then on. If the error persists, replace the cable. If the error still persists, contact an HP-authorized service or support provider. See the HP support flyer, or go to http://www.hp.com/suppport/clj4730mfp. The scanner might be locked or the interface Make sure the scanner is unlocked and the cable might be seated incorrectly. interface cable is seated correctly. An error has occurred with the output device. Remove and reinstall the ouptut device. Observe the LED on the device. If it is flashing Control panel messages 257