HP Color LaserJet 4730 HP Color LaserJet 4730mfp - User Guide - Page 289
Replace Fuser Kit
View all HP Color LaserJet 4730 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 289 highlights
Control panel message REMOVE ALL PRINT CARTRIDGES To exit press Stop Remove at least one print cartridge. To exit press Stop REPLACE CARTRIDGE The supplies gauge will display the consumption levels of print cartridges. alternates with To continue touch "OK". The supplies gauge will display the consumption levels of print cartridges. REPLACE FUSER KIT For help press Description Recommended action The MFP is executing a component test and Remove all print cartridges. the component selected is Belt Only. The MFP is executing a disable cartridge check or component test where the component selected is the cartridge motor. Remove one print cartridge. The identified print cartridge has reached the 1. end of life and the COLOR SUPPLY OUT setting in the SYSTEM SETUP menu is set to 2. STOP AT LOW. Printing can continue. 3. Order the appropriate print cartridge. To continue, touch OK. Open the top and side covers and then open the image transfer unit. CAUTION The image transfer unit can be easily damaged. 4. Remove the identified print cartridge. 5. Install a new print cartridge. 6. Close the image transfer unit and then close the top and front covers. 7. Supplies ordering information is also available from the embedded Web server. See Using the embedded Web server for more information. The fuser kit has reached the end of its life. 1. Open the top cover. Replace the fuser kit. Printing can continue but print quality might be reduced. 2. Grasp the purple handles on the fuser unit. 3. Remove the old fuser unit from the MFP. 4. Install a new fuser unit and secure with thumb screws. 5. Close the top cover. 6. Supplies ordering information is also available from the embedded Web server. See Using the embedded Web server for more information. ENWW Control panel messages 269