HP Color LaserJet 4730 HP Color LaserJet 4730mfp - User Guide - Page 279
Digital Send Communications Error, Digital Send Server Error
View all HP Color LaserJet 4730 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 279 highlights
Control panel message Description Recommended action Date/Time Prompt for setting the MFP date and time. Default format is [YYYY]/[MMM]/[DD] [HH][MM]. To change, touch OK and follow the time and date prompts. DELETING PRIVATE JOBS The MFP is deleting a private stored job. A No action necessary. PIN is required to delete a private job. Deleting... X The MFP is currently deleting the stored job. No action necessary. Digital Send Communications Error An error has occurred during a digital send Contact the network administrator. task. Digital Send Server Error The MFP cannot communicate with the server. Verify the network connection. Contact the network administrator. DISK DEVICE FAILURE To clear touch "OK". alternates with Ready A device failure has occurred on the specified 1. drive. Printing may continue for jobs that do not require access to the disk drive. 2. To clear the message, touch OK. If the message persists, remove and reinstall the EIO disk drive. 3. Turn the MFP back on. 4. If the message still persists, replace the EIO disk drive. DISK FILE OPERATION FAILED To clear touch "OK". alternates with The MFP received a PJL file system 1. command that attempted to perform an illogical operation (for example, to download 2. a file to a non-existent directory). Printing may continue. 3. To clear the message, touch OK. If the message persists, turn the MFP off then on. If the message reappears, there may be a problem with the software application. Ready DISK FILE SYSTEM IS FULL To clear touch "OK". alternates with Ready The MFP received a PJL file system 1. command that attempted to store something on the file system but was unsuccessful because the file system is full. Use the HP Web Jetadmin software to delete files from the EIO disk drive, or delete the stored job from the MFP control panel. 2. To clear the message, touch OK. 3. If the message persists, turn the MFP off then on. DISK IS WRITE PROTECTED The file system device is protected and no new files can be written to it. 1. To enable writing to the disk, turn off write protection, using HP Web Jetadmin. To clear touch "OK". 2. To clear the message, touch OK. alternates with Ready 3. If the message persists, turn the MFP off and then on. E-mail Gateway did not respond. Job failed. A gateway has exceeded the time out value. Validate the SMTP IP address. See Solving e-mail problems. E-mail Gateway rejected the job because One or more of the e-mail addresses is of the addressing information. Job failed. incorrect. Send the job again. EIO X DISK The EIO disk in slot X is not working correctly. 1. Turn the MFP off. NOT FUNCTIONAL For help press 2. Remove the EIO disk from the slot indicated and replace with a new EIO disk drive. ENWW Control panel messages 259