HP Color LaserJet 4730 HP Color LaserJet 4730mfp - User Guide - Page 75
Copy/send settings, SYSTEM SETUP
View all HP Color LaserJet 4730 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
Item LANGUAGE Values List of available languages Explanation OFF: The MFP does not reprint pages following a jam. Printing performance might be increased with this setting. ON: The MFP automatically reprints pages after a jam is cleared. Sets the language of the control panel. Copy/send settings This table lists the options that are available for the COPY SEND SETTINGS, which are part of the SYSTEM SETUP submenu. Item INACTIVITY TIMEOUT Values 10-300 SECONDS AUTO SETTINGS RESET OFF* ON TIMEOUT AFTER SEND 10-300 SECONDS HOLD OFF PRINT JOB HOLD OFF TIME OFF ON* 0-300 SECONDS SCAN AHEAD OFF ON* AUTO JOB INTERRUPT OFF* ON COPY JOB INTERRUPT OFF* ON Explanation Defines the amount of time until the copy settings return to the default settings after any control panel activity is completed. If you reset the MFP, the value resets to the default. Default=60 Allows automatic reset of copy/send settings after the defined timeout. When set to OFF, you are prompted to reset the settings or continue with the same settings. If this item is set to ON, the settings are automatically reset after each send job. The default is OFF. Defines the amount of time before the send settings return to the default settings after any control-panel activity is completed. This item displays only when AUTO SETTINGS RESET is OFF. Default=20 Prevents network print jobs from starting within a specified period after a copy is completed. Defines the amount of time that print jobs must wait if HOLD OFF PRINT JOB is set to ON. Default=15 Allows a copy job to be scanned even if the MFP is printing another job. The job will be scanned and held until it can be printed. If this setting is set to OFF, the job is not scanned until the print job is completed. Allows a copy job to automatically interrupt any currently printing network print job. The copy job is placed between full copies of the job that is currently printing. If this setting is set to OFF, the job is not printed until all copies of the print job are completed. Allows you to interrupt the current copy job to make a different copy. When you press the Start button, the MFP shows a message that asks if you want to interrupt the current copy job. ENWW Configure device menu 55