HP Color LaserJet 4730 HP Color LaserJet 4730mfp - User Guide - Page 73

Item SLEEP DELAY WAKE TIME COPY SEND SETTINGS PERSONALITY ENWW Values Explanation PostScript rules or HP rules. The values for this menu item are ENABLED (follows the HP rules) or Disabled. SIZE/TYPE PROMPT controls whether the tray configuration message and its prompts are shown whenever a tray is configured for a type or size other than the type or size that is loaded in the tray. USE ANOTHER TRAY determines whether the MFP uses paper from another tray of the designated tray is empty. DUPLEX BLANK PAGES determines whether blank pages are duplexed. IMAGE ROTATION determines if images are rotated. The default is STANDARD. 1 MINUTE 15 MINUTES 30 MINUTES 45 MINUTES 60 MINUTES* 90 MINUTES 2 HOURS 4 HOURS Sets how long the MFP remains idle before it enters sleep mode.Using sleep mode offers the following advantages: ● Minimizes the amount of power that the MFP consumes when it is idle ● Reduces wear on electronic components in the MFP NOTE Sleep mode turns off the backlight on the display, but the display is still readable. The MFP automatically exits sleep mode when you send a print job, open or close a paper tray, receive a fax, touch any button on the control panel, touch any part of the touchscreen, open the scanner lid, or load media into the ADF. To enable or disable sleep mode, see Resets submenu. List of days of the week OFF* CUSTOM Sets the time that the MFP automatically comes out of sleep mode. This feature can be set for a different time for each day of the week. Or, if you wish to apply the same settings to each day, select APPLY TO ALL DAYS Each day displays the following values: Hour 1-12, Minute 0-59, AM, and PM. For information about these settings, see the separate table Copy/send settings. AUTO* PCL PDF Select the default MFP language (personality). Possible values are determined by which valid languages are installed in the MFP. Configure device menu 53