HP Color LaserJet CM4730 Service Manual - Page 115

Table 3-16 Print Quality menu Menu item Sub-menu item Adjust Color Highlights Midtones Shadows Set Registration Test Page Source Adjust Tray Print Modes Auto Sense Mode Tray 1 Autosense Tray 2-4 Sensing Values Description Cyan Density. Magenta Density. Yellow Density. Black Density +5 to -5. Default is 0. Adjust the darkness or lightness of highlights on a printed page. Lower values represent lighter highlights on a printed page, and higher values represent darker highlights on a printed page. Cyan Density. Magenta Density. Yellow Density. Black Density +5 to -5. Default is 0. Adjust the darkness or lightness of midtones on a printed page. Lower values represent lighter midtones on a printed page, and higher values represent darker midtones on a printed page. Cyan Density. Magenta Density. Yellow Density. Black Density +5 to -5. Default is 0. Adjust the darkness or lightness of shadows on a printed page. Lower values represent lighter shadows on a printed page, and higher values represent darker shadows on a printed page. Print Shift the margin alignment to center the image on the page from top to bottom and from left to right. You can also align the image on the front with the image printed on the back. All trays Tray : (choose a tray) Shift from -20 to 20 along the X or Y axes. 0 is the default. Print a test page for setting the registration. Select the source input tray for printing the Set Registration page. Perform the alignment procedure for each tray. When it creates an image, the device scans across the page from side to side as the sheet feeds from top to bottom into the device. The scan direction is referred to as X. X1 is the scan direction for the first side of a 2-sided page. X2 is the scan direction for the second side of a 2-sided page. The feed direction is referred to as Y. Full Sensing (default) Expanded Sensing Transparency Only Expanded Sensing Transparency Only (default) Configure which mode is associated with which paper type. When Expanded Sensing is selected, the device recognizes normal paper, overhead transparencies, glossy paper, and tough paper. When Transparency Only is selected, the device recognizes only overhead transparency and non-overhead transparency types. When Expanded Sensing is selected, the device recognizes normal paper, overhead transparencies, glossy paper, and tough paper. When Transparency Only is selected, the device recognizes only overhead transparency and non-overhead transparency types. ENWW Control-panel menus 95