HP Color LaserJet CM4730 Service Manual - Page 40

Installation checklist When setting up the MFP for the first time, perform the following tasks to ensure that the MFP is installed correctly. Table 2-1 HP Color LaserJet CM4730 MFP installation Item Details Verify that the MFP is connected to an adequate power source. A minimum of 10A (110V) or 5A (220V) circuit required. Uninterruptible Power Supplies (UPS) are not recommended. Do not use a power strip. Any devices attached to the same power source can lead to intermittent problems. Verify that MFP resides in an adequate space. Adequate space so that the MFP may be accessed from all sides. Tight space makes the system difficult to access for jam clearing and service. Verify that surface has adequate, level support. Ensure the MFP is on a level and stable surface. Ensure wheel locks are engaged. Verify that all orange tape and packaging materials have been removed. See details in the HP Color LaserJet CM4730 MFP series Getting Started Guide. Verify that the print cartridges and paper have been installed in the MFP. Use known good quality paper. Verify the I/O cable, such as a LAN, USB, or parallel cable, has been connected to the corresponding I/O port on the MFP. See details in the HP Color LaserJet CM4730 MFP series Getting Started Guide. Verify the scanner shipping lock has been moved to the unlocked position. See details in the HP Color LaserJet CM4730 MFP series Getting Started Guide. Verify the correct language and date/time are set. See details in the HP Color LaserJet CM4730 MFP series Getting Started Guide. Configure the e-mail gateways. Scroll to and touch Administration, Initial Setup, E-mail Setup, and Find Send Gateways. If auto-discovery does not find the e-mail gateways, obtain the addresses from your network administrator and manually configure these on the MFP. If the fax accessory is installed, ensure it is properly configured. Scroll to and touch Administration, Initial Setup, Fax Setup, and Required Settings. Fill in the date/time, location and fax header information. See details in the HP LaserJet Analog Fax Accessory 300 User Guide. Print the configuration pages. Scroll to and touch Administration, Information, Configuration/Status Pages, Configuration Page, and Print. On the configuration page printouts, verify the following: ● LDAP gateway address displays. ● SMTP gateway address displays. The HP Color LaserJet CM4730 MFP information and training CD provides detailed information on how to read the configuration page. 20 Chapter 2 Installation ENWW