HP Color LaserJet CM4730 Service Manual - Page 120

Table 3-17 Troubleshooting menu (continued) Menu item Sub-menu item Sub-menu item Print/Stop Test Color Band Test Scanner Tests Test Page Copies Control Panel LEDs Display Buttons Touchscreen Values Continuous value from 0 to 60,000 milliseconds. Default: 0 Print Description Isolate faults by stopping the device during the print cycle and observing where in the process the image degrades. To run the test, specify a stop time. The next job that is sent to the device stops at the specified time in the process. Prints a page that helps identify arcing in the high-voltage power supplies. Specify the number of copies to print for the Color Band test A service technician can use this menu item to diagnose potential problems with the device scanner. Verify that the components of the control panel are functioning correctly. Resets menu Administration > Resets Table 3-18 Resets menu Menu item Values Description Clear Local Address Book Clear Use this feature to clear all addresses from the address books that are stored on the device. Clear Fax Activity Log Yes Use this feature to clear all events from the Fax Activity Log. No (default) Restore Factory Telecom Setting Restore Use this option to restore the following settings to their factory default settings: Transmit Signal Loss, V34, Maximum Baud Rate, Speaker Mode. Restore Factory Settings Restore Use this feature to restore all device settings to their factory defaults. Clear Document Feeder Message Clear Use this feature to clear the Order Document Feeder Kit and Replace Document Feeder Kit warning messages. Reset Supplies New Document Feeder Kit (Yes/ Notify the device that a new document-feeder kit has been installed. No) Service menu The Service menu is locked and requires a PIN for access. The PIN code for this MFP is 05473007. 100 Chapter 3 Manage and maintain ENWW