HP Color LaserJet CM4730 Service Manual - Page 131

Change network settings Change the network internet protocol (IP) settings from the computer. You also can open the embedded Web server to change additional settings. For more information, see Embedded Web server on page 104. 1. Open the HP Printer Utility. 2. In the Configuration Settings list, select IP Settings. 3. Change any of the settings in the following pop-up menus or fields: ● Configuration ● Host Name ● IP Address ● Subnet Mask ● Default Gateway If you want to change more settings in the embedded Web server, click Additional Network Settings. The embedded Web server opens with the Networking tab selected. 4. Click Apply Now. Open the embedded Web server 1. Open the HP Printer Utility. 2. In the Configuration Settings list, select Additional Settings. 3. Click Open Embedded Web Server. Set up e-mail alerts Set up e-mail messages that alert you to certain events that occur with the printer, such as a low toner level in a print cartridge. 1. Open the HP Printer Utility. 2. In the Configuration Settings list, select E-mail Alerts. 3. Click the Server tab, and, in the SMTP Server box, type the server name. 4. Click the Destination tab, click the add (+) button, and then type the e-mail addresses, mobile device numbers, or Web site URLs to which you want the e-mail alerts sent. NOTE: If your printer supports e-mail lists, you can make alerts lists for specific events the same way that you added e-mail addresses. 5. Click the Events tab, and, in the list, define the events for which an e-mail alert should be sent. 6. To test the alerts setup, click the Server tab, and then click Test. A sample message is sent to the defined e-mail addresses if the configuration is correct. 7. Click Apply Now. ENWW Management tools 111