HP Color LaserJet CM4730 Service Manual - Page 136

Replacing supplies When using genuine HP supplies, the MFP automatically notifies you when supplies are nearly depleted. The notification to order supplies allows ample time to order new supplies before they need to be replaced. Locate supplies The following figure illustrates the location of each supply item. Figure 3-2 Supply item locations 1 Fuser 2 Print cartridges 3 ETB Supply replacement guidelines To facilitate the replacement of supplies, keep the following guidelines in mind when setting up the MFP. ● Allow sufficient space above and in the front of the MFP for removing supplies. ● The MFP should be located on a flat, sturdy surface. For instructions on installing supplies, see the installation guides provided with each supply item or see more information at http://www.hp.com/support/ljcm4730mfp. When you connect, select Solve a Problem. CAUTION: Hewlett-Packard recommends the use of genuine HP products in this MFP. Use of non-HP products may cause problems requiring service that is not covered by the HewlettPackard extended warranty or service agreements. Making room around the MFP for replacing supplies The following illustration shows the clearance necessary in front of, above, and to the side of the MFP for replacing supplies. 116 Chapter 3 Manage and maintain ENWW