HP Scanjet Enterprise 7000n HP Scanjet 7000n Series - User Guide - Page 19
Navigate the Administration menu, Jetdirect menus, Table 2-1, Administration
View all HP Scanjet Enterprise 7000n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Navigate the Administration menu From the Home screen, touch the Administration button to open the menu structure. You might need to scroll to the bottom of the Home screen to see this feature. The Administration menu has several sub-menus that you can use for some setup tasks. (Use the Embedded Web Server to configure all settings.) Touch the name of a menu to expand the structure. A plus sign (+) next to a menu name means that it contains sub-menus. Continue opening the structure until you reach the option that you want to configure. To return to the previous level, touch the Back button . To exit the Administration menu, touch the Home button in the upper-left corner of the screen. The product has built-in Help that explains each of the features that are available through the menus. Help is available for many menus on the right-hand side of the touch screen. The table in this section provides general information about each menu. For information about specific entries in each menu, see the built-in Help. Table 2-1 Administration menus Menu item Description Information menu Default Job Options menu Time/Scheduling menu Management menu Initial Setup menu Device Behavior menu Use this menu to view information pages and reports that are stored internally on the product. Use this menu to define the default job options for each function. These are used if the user does not specify other options when creating the job. Use this menu to set options for setting the time and period of inactivity before the product enters sleep mode. Use this menu to set up global product-management options. Use this menu to set networking and I/O parameters for the product. For information about Jetdirect menu entries, see the Jetdirect Menu section. Use this menu to set the behavior and language of the display. Jetdirect menus Administration > Initial Setup > Networking and I/O > Jetdirect Menu Table 2-2 Jetdirect menus Menu item Sub-menu item Sub-menu item Values and Description TCP/IP Enable Off: Disable the TCP/IP protocol. On (default): Enable the TCP/IP protocol. Host Name An alphanumeric string, up to 32 characters, used to identify the product. This name is listed on the HP Jetdirect configuration page. The default host name is NPIxxxxxx, where xxxxxx is the last six digits of the LAN hardware (MAC) address. ENWW Navigate the Administration menu 11