HP Scanjet Enterprise 7000n HP Scanjet 7000n Series - User Guide - Page 74
Clean the product, Clean the touch screen
View all HP Scanjet Enterprise 7000n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Clean the product Cleaning product components helps keep your product in optimal working order. ● Clean the touch screen ● Clean the product glass ● Clean the paper path ● Clean the rollers Clean the touch screen Clean the touch screen whenever it is necessary to remove fingerprints or dust. Wipe the touch screen gently with a clean, water-dampened, lint-free cloth. CAUTION: Use water only. Solvents or cleaners can damage the touch screen. Do not pour or spray water directly onto the touch screen. Clean the product glass Both strips of glass in the product should be cleaned periodically, or any time a scanned image has streaks. The two small strips of gray reflective material should be lightly dusted if debris is present. TIP: Before cleaning the product glass, press the Power button to turn off the product and allow 10 minutes for the glass to cool. To clean the strips of glass, follow these steps: 1. Press the Power button to turn off the product. 2. Open the hatch. 3. Clean the glass using a soft, lint-free cloth that has been sprayed with a mild glass cleaner. CAUTION: Use only glass cleaner to clean the glass. Avoid cleaners that contain abrasives, acetone, benzene, and carbon tetrachloride, all of which can damage the glass. Avoid isopropyl alcohol because it can leave streaks on the glass. Do not spray the glass cleaner directly on the glass. If too much glass cleaner is applied, the cleaner could leak under the glass and damage the product. 66 Chapter 7 Manage and maintain the product ENWW