HP Scanjet Enterprise 7000n HP Scanjet 7000n Series - User Guide - Page 20
Control panel, Jetdirect menus continued
View all HP Scanjet Enterprise 7000n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Table 2-2 Jetdirect menus (continued) Menu item Sub-menu item IPV4 Settings Sub-menu item Config Method Default IP DHCP Release DHCP Renew Values and Description Specifies the method that TCP/IPv4 parameters will be configured on the HP Jetdirect server. Bootp: Use BootP (Bootstrap Protocol) for automatic configuration from a BootP server. DHCP: Use DHCP (Dynamic Host Configuration Protocol) for automatic configuration from a DHCPv4 server. If selected and a DHCP lease exists, DHCP Release and DHCP Renew menus are available to set DHCP lease options. Auto IP: Use automatic link-local IPv4 addressing. An address in the form 169.254.x.x is assigned automatically. Manual: Use the Manual Settings menu to configure TCP/IPv4 parameters. Specify the IP address to default to when the Jetdirect server is unable to obtain an IP address from the network during a forced TCP/IP reconfiguration (for example, when manually configured to use BootP or DHCP). Auto IP: A link-local IP address 169.254.x.x is set. Legacy: The address 192.0.0.192 is set, consistent with older HP Jetdirect products. This menu appears if the Config Method item was set to the DHCP value and a DHCP lease for the Jetdirect server exists. No (default): The current DHCP lease is saved. Yes: The current DHCP lease and the leased IP address are released. This menu appears if the Config Method item was set to the DHCP value and a DHCP lease for the Jetdirect server exists. No (default): The Jetdirect server does not request to renew the DHCP lease. Yes: The Jetdirect server requests to renew the current DHCP lease. 12 Chapter 2 Control panel ENWW