Intel E6700 Mechanical Design Guidelines - Page 46
Material and Recycling Requirements
UPC - 735858184618
View all Intel E6700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Balanced Technology Extended (BTX) Thermal/Mechanical Design Information 5.2.3 5.3 Recommended BIOS/CPU/Memory Test Procedures This test is to ensure proper operation of the product before and after environmental stresses, with the thermal mechanical enabling components assembled. The test shall be conducted on a fully operational motherboard that has not been exposed to any battery of tests prior to the test being considered. Testing setup should include the following components, properly assembled and/or connected: • Appropriate system motherboard • Processor • All enabling components, including socket and thermal solution parts • Power supply • Disk drive • Video card • DIMM • Keyboard • Monitor The pass criterion is that the system under test shall successfully complete the checking of BIOS, basic processor functions and memory, without any errors. Material and Recycling Requirements Material shall be resistant to fungal growth. Examples of non-resistant materials include cellulose materials, animal and vegetable based adhesives, grease, oils, and many hydrocarbons. Synthetic materials such as PVC formulations, certain polyurethane compositions (such as, polyester and some polyethers), plastics that contain organic fillers of laminating materials, paints, and varnishes also are susceptible to fungal growth. If materials are not fungal growth resistant, then MILSTD-810E, Method 508.4 must be performed to determine material performance. Material used shall not have deformation or degradation in a temperature life test. Any plastic component exceeding 25 grams must be recyclable per the European Blue Angel recycling standards. 46 Thermal and Mechanical Design Guidelines