JVC KD-AV7010 Instructions - Page 22

ENGLISH Basic Disc Operations Before performing any operations, observe the following... • For DVD playback, change the Setup Menu setting (see page 43). • If " " appears on the monitor, the disc cannot accept the operation you have tried. - In some cases, " " is not display, but operations will not be accepted. 1 Insert a disc 3 Operate the disc : Selects the folder (only for MP3). : Stops (see "Stopping play" on page 75). • VCD/CD/MP3 playback will continue endlessly until you stop it. : Starts playback. The unit turns on, then draws the disc, and starts playback automatically. • The monitor does not come out from its compartment if "AUTO OPEN/CLOSE" is set to "OFF" (see page 46). If the monitor does not comes out... : Pauses. To resume playback, press 3. : Goes back to the beginning of the current chapter/track, then skips to the previous chapters/ tracks if pressed repeatedly. : Skips to the following chapters/ tracks if pressed repeatedly. To stop play and eject the disc: • It takes several seconds for the unit to detect a disc type. • If a disc menu appears, see page 25. 2 Adjust the volume Volume level appears. Do not use the following discs: Warped disc Sticker Sticker residue Disc Stick-on label 22