JVC KD-AV7010 Instructions - Page 55
Removing the monitor, Changing the monitor position, angle
UPC - 046838019401
View all JVC KD-AV7010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
ENGLISH Changing the monitor position angle To operate the car switches behind the monitor, press and hold OPEN. The monitor change its angle to the illustrated You can change the monitor position and the position for about 30 seconds. monitor angle. • Once you change them, they are stored. The monitor opens at the stored position and angle, next time you eject the monitor. To return to its previous angle within 30 seconds, press OPEN again. To change the monitor position Removing the monitor On the main unit When detaching and attaching the monitor, observe the following: • Be careful not to drop the monitor. • Be careful not to damage the connectors. To change the monitor angle MAIN SUB then To detach the monitor 1 Hold The monitor goes back into its compartment if it has been used, then comes out halfway. 2 AVOUT VOL On the main unit On the remote controller 3 Insert the blind cover to protect the internal mechanism from dust. Each time you press the button, the monitor changes its angle step by step. • By holding the button (+/-), you can easily change the angle to its extreme (+/-). To attach the monitor Insert the monitor into the compartment with the screen facing down. 55