JVC KD-AV7010 Instructions - Page 50

ENGLISH AUTO SURROUND You can activate an appropriate surround mode automatically when a loaded disc is detected. • ON: An appropriate surround/DSP mode is automatically selected. While Dolby Digital multi-channel signals are detected, "Dolby Digital" is automatically selected. • FRONT LEFT: For the front left seat. • FRONT RIGHT: For the front right seat. • ALL CENTER: For all front and rear seats. • REAR CENTER: For the rear seats. • : Displays the SPK DISTANCE screen. You can adjust the speaker distance from your listening position in meters or feet. While DTS multi-channel signals are detected, "DTS" is automatically selected. While Dolby Surround (PL II) signals are detected, "Dolby Pro Logic II Movie" is automatically selected. While Linear PCM signals are detected (for DVD/CD), "Dolby Pro Logic II Music" is automatically selected. While other signals are detected, Surround mode is defeated. • : Displays the SPK LEVEL screen. You can adjust the speaker level referring to the test tone. • OFF: Cancels this function. Auto Surround does not work for any sources other than "DISC." When another source is selected, the currently selected Surround or DSP mode is resumed (see page 37). SEAT POSITION Select the listening seat position where you want to locate the sound image. • Speaker distance and speaker level can be memorized for each position. Emits the test tone from each speaker in sequence. To stop, press again. D (Dynamic). RANGE COMPRESSION You can enjoy a powerful sound even at a low volume level by compressing dynamic range (difference between the lowest and the highest frequency sounds). • This takes effect for all the playback sources. Display sub-setting screens. 50