Kyocera KM-1650 1650/2050/2550 Operation Guide (Advanced)
Kyocera KM-1650 Manual
View all Kyocera KM-1650 manuals
Add to My Manuals
Save this manual to your list of manuals |
Kyocera KM-1650 manual content summary:
- Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 1
- Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 2
Note This Operation Guide is for 1650, 2050, and 2550. This Operation Guide mentions that 1650 is a 16 ppm (prints per minute) model, 2050 is a 20 ppm (prints per minute) model, and 2550 is a 25 ppm (prints per minute) model. This Operation Guide contains information that corresponds to using both - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 3
and printing, and troubleshooting. Advanced Operation Guide (this guide) The Advanced Operation Guide contains explanations on copier and printer functions as well as default settings that can be adjusted on this machine. KX Printer Driver Installation Guide This guide describes the procedure to - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 4
Conventions This manual uses the following conventions: 3 4 1 2 1 Bold indicates key names. 2 Courier indicates content of the message display. 3 Note contain important information aside from the text. 4 Italic refers to another page or other guide. ii - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 5
CONTENTS 1 Copier Functions 1-1 Paper Source Program Function ...1-32 2 Printer Settings 2-1 Using This Machine as a Network Printer 2-2 Menu Hierarchical Diagram ...2-3 Printing Code Job List ...2-12 e-MPS Detail Settings ...2-13 Interface ...2-16 Parallel Interface ...2-16 Network Setting - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 6
3-1 Default Setting Mode ...3-2 Copier Default Settings ...3-2 Machine Default Settings 3-12 Multi-Bypass Tray Settings ...3-26 Paper Size ...3-26 Paper Type ...3-28 Browsing and Printing the Total Counter 3-29 Report Output ...3-31 Language Setting ...3-33 User Adjustment ...3-34 Drum Refresh - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 7
Default Settings ...4-13 Copier Job Accounting ...4-13 Printer Job Accounting ...4-14 Scanner Job Accounting 4-14 Fax Job Accounting ...4-15 Operation Special Paper ...Appendix-5 Specifications ...Appendix-8 Main Body ...Appendix-8 Copier Functions Appendix-9 Printer Functions Appendix-10 - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 8
vi - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 9
1 Copier Functions This chapter explains the following topics. • Paper Source Selection • Original Size Selection • Image Quality Mode • Copy Exposure Adjustment • Number of Copies to Be Made • - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 10
Copier Functions Paper Source Selection Perform the following procedure to select a paper source (cassette or multi-bypass tray) with the desired paper size. 1 Set the original. Ready to copy. If Auto is displayed on the message display, copy paper of the same - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 11
Copier Functions Original Size Selection With manual original size selection, this machine can scan only the part of a specified size of the original for copying. Also you can use an irregular size original by inputting the original size. Selecting - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 12
Copier Functions 6 Press the Enter key. 7 Press the Start key. Copying starts. Inputting the Original Size 1 Set the original. 2 Press the Original Size key. 3 Press the S - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 13
Copier Functions Image Quality Mode You can select the image quality mode according to the type of originals. on page 3-8 and Exposure Adjustment for Photo Originals on page 3-8.) • If you select the Photo mode, the manual copy exposure mode is set. (See Copy Exposure Adjustment on page 1-6.) 1-5 - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 14
. The following modes are available for copy exposure adjustment. Mode Auto exposure mode Manual exposure mode Description The machine detects the density of the original and sets the optimum exposure. The operator presses the Lighter key or the Darker key to adjust the exposure. Auto Exposure - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 15
Copier Functions Number of Copies to Be Made Set the number of copies to be made as follows. You can set the number of copies to - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 16
Copier Folio Æ A4), 75 % (11 × 15" Æ A4), 70 % (A3 Æ A4, A4 Æ A5), 50 % (A3 Æ A5) Metric Specification (Asia Pacific) 200 % (A5 Æ A3), 141 % (A4 Æ A3, B5 Æ B4), 122 % (A4 Æ B4, A5 Æ B5), 115 default setting so that the auto zoom ratio selection mode is selected when you select a cassette. (See Default - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 17
Copier Functions 4 Press the Start key. Copying starts. Zoom Mode 1 With this mode, zoom ratio is displayed on the message display. Zoom: (The display example shows a screen displayed when an operator enters 1, 1, and 8.) 118% 121%:8.5x14 11x17 100%: 78%:8.5x14 8.5x11 4 Press the Enter key. - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 18
Copier : Left top Original Rear Left top Note You can change the default setting of the orientation of the original. (See Original Orientation on or the T key to select Orig. direction. Function: End Orig. direction Continuous scan : Rear : Off 3 Press the Enter key. 4 Press the S key or - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 19
Copier Functions Interrupt Mode The interrupt mode can be used to stop output of copying or another job temporarily and to output urgent copy or print data or received fax To use the fax functions, the optional fax kit must be has neither print data nor received fax data, Interrupt mode OK [Interrupt - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 20
Copier Functions Note • Priority:Printer is displayed when the machine has print data. • Priority:Fax is displayed when the machine has received fax data. 3 Press the Enter key. If you have selected Interrupt copy, message Interrupt mode OK [Interrupt mode] is displayed. Proceed to the next step. If - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 21
Copier Functions Duplex Copying Two-sided copies can be made from a variety of originals including double-page spread or two-sided originals. Note The optional duplex - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 22
Copier Functions Mode Book->2-sided (2-sided copying from double-page spread originals) Description A double-page spread original of magazines, books and 16K in the inch specifications and A4, B5, and 16K in the metric specifications. The paper size can be the Start key. Scanning of the original - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 23
Copier Functions Split Copying Each specifications. The paper size can be changed and the zoom ratio adjusted to fit the size of the paper. 2 Press the Duplex/Split Page key. 3 Press the S key or the T key to select the desired split copy mode from 2 sided->1 sided [2-sided->1-sided] and Book - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 24
Copier Functions 7 Press the Start key. Scanning of the original starts. If the originals have been set in the optional document processor, . In this case, proceed to the next step. 8 Replace the original and press the Start key. Scanning of the original is performed. 9 When all originals have been - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 25
Copier Functions Sort Copying Since copying in this mode is performed after multiple originals have been scanned and memorized, at a default setting. (See Sort Copying on page 3-8.) 1 Set the original. 2 Press the Sort key. 3 Input the number of copies and press the Start key. Scanning of the - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 26
Copier • You can select whether or not to turn on the offset mode at a default setting. (See Offset Copying on page 3-9.) • When setting the offset copying, Sort key. 4 Input the number of copies and press the Start key. Scanning of the original starts. If the originals have been set in the optional - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 27
Copier Functions Staple Copying Copies can be stapled at the upper desired stapling position. Staple: Left Top Right Top 4 Press the Enter key. 5 Press the Start key. Scanning of the original starts. If the originals have been set in the optional document processor, copying starts automatically. If - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 28
Copier Functions Combine Copying Two or four originals can be reduced and copied onto a single sheet. Also borderlines of each original can be marked with solid - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 29
2 in 1 The orientations of the originals and the finished copy are shown below. When the originals are set on the platen: Copier Functions Original Copy Original Copy When the originals are set in the document processor: Original Original Copy Copy 1-21 - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 30
Copier Functions 4 in 1 (horizontal arrangement) The orientations of the originals and the finished copy are shown below. When the originals are set on the platen: Original Copy Original Copy When the originals are set in the document processor: 1-22 Original Copy Original Copy - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 31
4 in 1 (vertical arrangement) The orientations of the originals and the finished copy are shown below. When the originals are set on the platen: Copier Functions Original Copy Original Copy When the originals are set in the document processor: Original Copy Original Copy 1-23 - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 32
Copier Functions Borderline Types The following borderline types are available. Borderline type 2 in 1 None Copy 4 in 1 (horizontal arrangement)/ 4 in 1 (vertical arrangement) Solid Dotted Mark [Cropmark] Setting - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 33
Copier Functions 6 Press the Enter key 7 Press the Start key. Scanning of the original starts. If the originals have been set in the optional document case, proceed to the next step. 8 Replace the original and press the Start key. Scanning of the original is performed. 9 When all originals have been - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 34
Copier Functions Margin Mode The image of the original can be shifted to make a margin (blank) space at the left or top side on the copy. You can set the width of each margin to 1/8" to 3/4" in 1/8" increments [1 mm to 18 mm in 1 mm increments]. Note You can set the default value of - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 35
value of the border erase width. (See Border Erase Width Default Value on page 3-10.) Set the original. 2 Press the Border Erase key. 3 Press the S key or the T key to select Sheet Erase or Book Erase. Border Erase: Sheet Erase Book Erase 4 Press the Enter key. 5 Press the < key or the > key - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 36
Copier Functions Continuous Copying The continuous copying function allows multiple originals to be separated into some blocks, to be scanned at more than one time, and to be copied in one batch. Since multiple originals of the same type are scanned in multiple steps to accumulate data in memory, - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 37
Copier used for auto rotation. • You can select whether or not to enable auto rotation at a default setting. (See Auto Rotation Copy on page 3-9.) 1 Set the original. 2 Press the Function : Orig. direction Continuous scan Auto Rotation : Rear : Off : On Auto Rotation: Off * On 6 Press the Enter - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 38
Copier Functions EcoPrint Mode The ecoprint mode can reduce toner consumption. Use this mode when high quality copies are not necessary, for example, for trial copying. Notes • The copy exposure will be a little lighter. • You can select whether or not to turn on the ecoprint mode at a default - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 39
Copier Functions Auto Selection Mode With the auto selection mode, The original sizes that can be used for the auto selection mode: Inch Specification - 11 × 8 1/2" and 11 × 17" (Ledger) or 8 1/2 × 14" (Legal) and 8 1/2 × 11" (Letter) Metric Specification - A3 and A4, folio and A4R, or B4 and B5. - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 40
Copier Functions Program Function Up to eight combinations of copy modes and functions displayed on the operation panel can be registered as a single program. Registering a Program 1 Set the desired copy modes, etc., to be registered. 2 Press the Program key. 3 Press the S key - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 41
the settings required for using the printer functions. For setting operation required for using this machine as a network printer, use the operation panel. The principal settings that can be made are shown below. • Using This Machine as a Network Printer • Menu Hierarchical Diagram • Status Page - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 42
.) Principal setting items • Network • Emulation selection • Number of copies and print orientation • Print quality • Paper sizes for cassette and multi-bypass tray È Installation and setting operation of printer driver (Refer to the KX Printer Driver Operation Guide.) È Printing from application - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 43
User ID List of code No, Print JOB ` e-MPS Quick Copy ` Number of JOB: 0 to 50 Configuration Temp Code Job 0 to 9999 M Byte ` Size ` Interface ` Parallel Network Perm Code ` DHCP ` On, Off IP Address Subnet Mask Gateway EtherTalk ` On, Off Network On, Off Status Page ` USB - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 44
850 Line Printer IBM Proprinter Diablo 630 EPSON LQ-850 ` Select Font ` Internal ` I### ID Detail ` I### ` 4 to 999.75 Point Courier 0.44 to 99.99 CPI ` Dark, Regular Option Letter Gothic ` #### ID Detail Dark, Regular ` ` S###, M###, H###, O### ` 4 to 999.75 Point Code Set ` ##### 0.44 - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 45
Data Delete Font Delete Program Delete Macro Delete the language Format ` OK Paper Handling List of No, Print Partitions ` Bypass Mode ` Cassette, First ` Feed Select ` Bypass, Cassette 1 (to 4) Duplex Mode ` None, Short edge bind, Long edge bind Stack Select` Top tray, Finisher, Job - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 46
Settings Others ` Form Feed Time Out Print HEX-DUMP Printer Reset Resource Prot. Auto Continue Finishing Error Service 0 to 495 sec. ` OK ` On ` Off, Permanent, Perm/Temp ` On, Off ` Change # ` 0 to 495 sec. Proces. On, Off ` Duplex print` Staple mode ` On, Off ` Print - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 47
Settings Status Page Printing The printer default settings, the memory capacity, and so on are printed in a list. 1 Press the Printer key. 2 Press the S key or the T key to select MENU. Ready GO CANCEL MENU 3 Press the Enter key. 4 Press the S key or the T key to - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 48
Data • Printing Virtual Mailbox List • Printing Code Job List • e-MPS Detail Settings Notes • To use the e-MPS functions, the optional hard disk must be installed. For details on e-MPS, refer to the KX Printer Driver Operation Guide. • Even if the RAM Disk Operation (see page 2-44) is turned On - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 49
is complete. In the stored job mode, access codes are not used, and print data is stored in the hard disk after printing is complete. For the method of setting the respective functions with the printer driver, refer to the KX Printer Driver Operation Guide. 1 Display the e-MPS screen. (See How to - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 50
name is the name that has been set Select JOB with the printer driver. List 7 Press the Enter key. 8 Use the numeric keys to input the four-digit access code. The access code has been set with the printer List driver. Enter User ID 9 Press the Enter key. 10 Use the numeric keys to input - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 51
execute printing from the operation panel. For the method of setting with the printer driver, refer to the KX Printer Driver Operation Guide. 1 Display the e- input the five-digit access code. The access code has been set with the KM-NET 001:File B Printer Disk Manager. Enter User ID 7 Press - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 52
Printer Settings 5 Press the Enter key. The virtual mailbox list is printed. VIRTUAL MAIL BOX LIST Printing Code Job List Permanent code jobs in the hard disk can be printed. 1 Display the e-MPS screen. (See How to Display the e-MPS Screen on page 2-8.) 2 Press the S key or - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 53
Printer Settings e-MPS Detail Settings The e-MPS settings such as the maximum on page 2-8.) 2 Press the S key or the T key to select e-MPS Configuration. e-MPS List of VMB List of code JOB e-MPS Configuration 3 Press the Enter key. 4 Press the S key or the T key to select Quick Copy. e-MPS - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 54
Printer Settings 6 Press the < key or the > key to input the capacity for storage of temporary code jobs. You can set the Temporary Code Job Size capacity to 0 to 9999 MB. 1550 Mbyte 7 Press the Enter key. Total Capacity for Storage of Permanent Code Jobs Set the total capacity (upper limit) - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 55
Printer Settings 6 Press the < key or the > key to input the capacity for storage of virtual mailboxes (VMB). You can set the VMB Size capacity to 0 to 9999 MB. 1550 Mbyte 7 Press the Enter key. 2-15 - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 56
parallel interface of this machine supports a bi-directional/high-speed mode. The transmission/reception modes that can be set from the operation panel of this machine are shown below. Mode Auto Normal High speed Nibble (high) Description The printer automatically changes its communication mode - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 57
returns to the printer basic screen. Network Setting To perform network printing, network setting is required. This section describes the setting required for using the network function. Note Before setting the IP address, ask your network administrator to obtain the address and prepare it - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 58
to select On. EtherTalk Back On Off 7 Press the Enter key. 8 Press the Reset key. The message display returns to the printer basic screen. TCP/IP When connecting to a Windows network through TCP/IP, turn TCP/IP On. 1 Display the Interface screen. (See How to Display the Interface Screen on page - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 59
Printer Settings 7 Press the Enter key. DHCP This machine supports DHCP (Dynamic Host Configuration Protocol). When using your network environment. Check with your network administrator before performing this setting. • If you use the following procedure to manually register the IP address, be - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 60
the Enter key. 3 Use the same procedure as steps 6 to 8 of IP Address setting to input the address. Subnet Mask 0. 0. 0. 0 4 Press the Enter key. Next, set the default gateway. Default Gateway To register the default gateway, continue the procedure from step 4 above. 1 Press the S key or the - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 61
Status Page. Network Setting TCP/IP EtherTalk Network Status Page 5 Press the Enter key. 6 Press the S key or the T key to select On or Off. Network Status Page Setting Back On Off 7 Press the Enter key. 8 Press the Reset key. The message display returns to the printer basic screen. 2-21 - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 62
be used with this machine: PCL6, KC-GL, KPDL, KPDL (AUTO), Line Printer, IBM Proprinter, Diablo 630, EPSON LQ-850 If you set KC-GL, you Press the S key or the T key to select the desired interface. Interface Back Parallel Network 7 Press the Enter key. 8 Press the S key or the T key to select - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 63
Printer Settings KC-GL Pen Thickness If you have selected the KC-GL emulation, you can set the with the PRESCRIBE SPSZ command. For details of the PRESCRIBE commands, refer to the PRESCRIBE Command Reference Manual. 12 Press the Enter key. 13 Press the Reset key. The message display returns to the - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 64
data. Continue the procedure from step 9 of emulation mode selection to set this item as shown below. Available emulation modes: PCL6, KC-GL, Line Printer, IBM Proprinter, DIABLO 630, EPSON LQ-850 1 Press the S key or the T key to select Alt. Emulation. KPDL (AUTO) Back Alt. Emulation Print KPDL - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 65
Font Setting • Code Set Selection • Font List Printing Note You can set the font for each interface. How to Display the Font Screen 1 Press the Printer key. 2 the T key to select the interface to set. Interface Back Parallel Network 7 Press the Enter key. The Font screen is displayed. Next, - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 66
following items. I000 Display I S M H O Description Internal font Downloaded fonts Fonts in memory card Fonts in RAM disk or optional hard disk . The message display returns to the printer basic screen. Font Size If you have selected a proportional font as the default font, you can set the font - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 67
the printer basic screen. Courier/Letter Gothic Font Character Pitch You can set the character pitch of the Courier or Letter Gothic font. 1 Display the Font screen. (See How to Display the Font Screen on page 2-25.) 2 Press the S key or the T key to select Select Font. Font Back Select Font Code - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 68
the Enter key. 4 Press the S key or the T key to select the desired code set. Code Setting IBM PC-8 PC-855 Serbia ISO Cyrillic 5 Press the Enter key. 6 Press the Reset key. The message display returns to the printer basic screen. Font List Printing 1 Display the Font screen. (See How to Display - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 69
. Printing of the font list starts. Printer Settings Internal Scalable and Bitmapped Fonts List PRESCRIBE Font Name Scalable/Bitmap Password Selection [FSET] Font ID Internal Scalable and Bitmapped Fonts List PRESCRIBE Font Name Scalable/Bitmap Password Selection [FSET] Font ID 2-29 - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 70
the print configuration for each interface. How to Display the Page Set Screen 1 Press the Printer key. 2 Press the S key or the T key to select MENU. Ready GO the T key to select the interface to set. Interface Back Parallel Network 7 Press the Enter key. The Page Set screen is displayed. - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 71
(Reduce) Paper size Print size 8.5x11 8.5x11 98% 98% 7 Press the Enter key. 8 Press the Reset key. The message display returns to the printer basic screen. Print Orientation You can select the print orientation from portrait and landscape. 1 Display the Page Set screen. (See How to Display the - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 72
message display returns to the printer basic screen. Page Protect Mode To maintain the printer memory efficiently, the default setting of this mode is returns to the printer basic screen. Line Feed (LF) Action Set the action of the machine to be executed when it receives a line feed code (0AH). 1 - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 73
Printer Settings Carriage Return (CR) Action Set the action of the machine to be executed when it receives a carriage return code (0DH). 1 Display the Enter key. 6 Press the Reset key. The message display returns to the printer basic screen. Wide A4 The print area of the A4 size can be enlarged. - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 74
the following items for print quality. • KIR Mode • EcoPrint Setting • Resolution Setting • Print Density KIR Mode How to Display the Print Quality Screen 1 Press the Printer key. 2 Press the S key or the T key to select MENU. Ready GO CANCEL MENU 3 Press the Enter key. 4 Press the S key or the - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 75
Printer Settings EcoPrint Setting The ecoprint mode allows printing with less toner consumption. Use this Press the Enter key. 6 Press the Reset key. The message display returns to the printer basic screen. Resolution Setting With this machine, three types of resolution are available: 300 dpi - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 76
Printer Settings Print Density The print density can be adjusted among five levels from 1 (light) to 5 (dark). 1 Display the Print Quality key to set the print density. Print Density 3 5 Press the Enter key. 6 Press the Reset key. The message display returns to the printer basic screen. 2-36 - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 77
Printer Settings Memory Card Operation If the optional memory card is installed in this machine, the following operations are available. • Reading Font Data • Reading Macro Data • Reading Data • Reading Program • Writing Data • Deleting Data • Deleting Font Data • Deleting Program Data • Deleting - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 78
to read. 5 Press the Enter key. The selected data is read from the memory card. 6 Press the Reset key. The message display returns to the printer basic screen. Reading Program 1 Display the Memory Card screen. (See How to Display the Memory Card Screen on page 2-37.) 2 Press the S key or the - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 79
to delete. 5 Press the Enter key. The selected data is deleted from the memory card. 6 Press the Reset key. The message display returns to the printer basic screen. Deleting Font Data 1 Display the Memory Card screen. (See How to Display the Memory Card Screen on page 2-37.) 2 Press the S key or - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 80
to delete. 5 Press the Enter key. The selected program is deleted from the memory card. 6 Press the Reset key. The message display returns to the printer basic screen. Deleting Macro Data 1 Display the Memory Card screen. (See How to Display the Memory Card Screen on page 2-37.) 2 Press the S key - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 81
Printer Settings 1 Display the Memory Card screen. (See How to Display the Memory Card Screen on page 2-37.) 2 Press the S key or the T key to select - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 82
Printer Settings 5 Press the Enter key. The partition list is printed. PARTITION LIST 2-42 - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 83
• Printing a Partition List 1 Press the Printer key. 2 Press the S key or the T key to select MENU. Ready GO CANCEL MENU 3 Press the Enter key. 4 Press the S key or the T key to select HARD DISK. Menu Page Set Print Quality HARD DISK 5 Press the Enter key. The operation procedure of each item is - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 84
off ({). • The RAM disk area is assigned from the user available memory. Consequently, note that printing speed may be disk functions are disabled at the default setting. To use the RAM disk functions, set as follows. 1 Press the Printer key. 2 Press the S Operation 1 Press the Printer key. 2-44 - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 85
Disk Mode RAM Disk Mode On Off Change # 7 Press the Enter key. The operation procedure of each item is the same as that of the memory card operation. See Memory Card Operation on page 2-37. RAM Disk Size 1 Press the Printer key. 2 Press the S key or the T key to select MENU. Ready GO CANCEL - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 86
Printer Settings 10 Press the < key or the > key to input the RAM disk size. You can set the size to 1 to 1024 Mbyte. RAM Disk - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 87
Settings Paper Handling You can set the following items for paper. • Multi-Bypass Tray Mode • Paper Source • Duplex Print Mode • Output Destination • Override A4/Letter How to Display the Paper Handling Screen 1 Press the Printer key. 2 Press the S key or the T key to select MENU. Ready GO - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 88
4 Press the S key or the T key to select the desired paper source. Feed Select Back Bypass Cassette 1 5 Press the Enter key. 6 Press the Reset key. The message display returns to the printer basic screen. Duplex Print Mode Set the binding position on finished prints in duplex printing. Setting - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 89
S key or the T key to select Stack Select [Stack Slect]. Paper Handling Bypass Mode Feed Select Stack Select 3 Press the Enter key. 4 Press the S key the Enter key. 6 Press the Reset key. The message display returns to the printer basic screen. Override A4/Letter The A4 and 8 1/2 × 11" (Letter) - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 90
Printer Settings 4 Press the S key or the T key to select On or Off. Override A4/LT Back On Off 5 Press the Enter key. 6 Press the Reset key. The message display returns to the printer basic screen. 2-50 - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 91
Detection • Stapling Error Detection • Service Status Page Printing How to Display the Others Screen 1 Press the Printer key. 2 Press the S the time to 0, the machine does not perform a form feed until GO is manually selected. 1 Display the Others screen. (See How to Display the Others Screen - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 92
Settings 6 Press the Reset key. The message display returns to the printer basic screen. Received Data Dump You can print data received by this machine as hexadecimal codes for debugging programs and files. 1 Display the Others screen. (See How to Display the Others Screen on page 2-51.) 2 Press - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 93
Printer Settings Resource Protect Mode The resource protect mode protects the resource data such as downloaded fonts and macros and continue). • Memory Overflow/Press GO • Print overrun Press GO • KPDL error Press GO • File not found Press GO • HARD DISK error Press GO • RAM disk error Press GO • - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 94
second Auto Continue (time) increments. 30 sec. (0 495) 9 Press the Enter key. 10 Press the Reset key. The message display returns to the printer basic screen. Duplex Printing Error Detection This setting is available if the optional duplex unit is installed. You can select whether or not to - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 95
to select On or Off. Duplex Print Process Back On Off 7 Press the Enter key. 8 Press the Reset key. The message display returns to the printer basic screen. Stapling Error Detection You can select whether or not to display Add Staples and Press GO when staples have run out while stapling - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 96
Status Page Printing The service status page contains more detailed printer setting information than the normal status page. This page is mainly used by the service personnel for maintenance. Use the following procedure to print this page as needed. 1 Display the Others screen. (See How to Display - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 97
This chapter explains the system settings concerning the general operation of this machine. The principal settings that can be made are shown below. • Default Setting Mode • Multi-Bypass Tray Settings • Browsing and Printing the Total Counter • Report Output • Language Setting • User Adjustment 3-1 - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 98
S key or the T key to select Copy default. System Menu / Counter: Print Report Job Accounting Copy default 3 Press the Enter key. 4 Use the numeric keys to input the four-digit management code. The management code at the Enter pin code using # key. factory default setting is 1600 for the 16 ppm - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 99
on page 3-23.) If the management code is accepted, the Copy Default screen is displayed. Next, perform the setting referring to the following description of each setting item. Copy Default: End Exposure Mode Orig Quality : Manual : Text+Photo Note The * (asterisk) at an item on each setting - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 100
Mode Orig Quality EcoPrint : Manual : Text+Photo : Off 3 Press the Enter key. 4 To set the ecoprint mode as the default setting, press the S key or the T key to select On. EcoPrint: * Off On 5 Press the Enter key. 6 Press the Reset key. The message display returns to the copier basic screen - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 101
T key to select Auto or Default cassette. System Menu Paper select: * Auto Default cassette 5 Press the Enter key. 6 Press the Reset key. The message display returns to the copier basic screen. Paper Type in feeder is installed. • You cannot set the multi-bypass tray as the priority cassette. 3-5 - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 102
3 Press the Enter key. 4 Press the S key or the T key to select 100% or Auto %. Default magnification: * 100% Auto % 5 Press the Enter key. 6 Press the Reset key. The message display returns to the copier basic screen. Auto Exposure Adjustment Adjust the overall density in the auto exposure mode - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 103
key. The message display returns to the copier basic screen. Auto OCR Exposure Adjustment Adjust the overall density of scanning for OCR when using the optional scanner functions. 1 Display the Copy Default screen. (See How to Display the Copy Default Screen on page 3-2.) 2 Press the S key or - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 104
. The message display returns to the copier basic screen. Exposure Adjustment for Photo Originals Adjust the density of the central value in the manual exposure mode for photo originals. 1 Display the Copy Default screen. (See How to Display the Copy Default Screen on page 3-2.) 2 Press the S key - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 105
key. 6 Press the Reset key. The message display returns to the copier basic screen. Offset Copying Select whether or not to set the offset copy mode as a default setting. 1 Display the Copy Default screen. (See How to Display the Copy Default Screen on page 3-2.) 2 Press the S key or the T key to - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 106
the Enter key. 6 Press the Reset key. The message display returns to the copier basic screen. Margin Width Default Value Set the default value of the margin width. 1 Display the Copy Default screen. (See How to Display the Copy Default Screen on page 3-2.) 2 Press the S key or the T key to select - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 107
Default : Margin Width BorderEraseWidth Copy Limit : 1/4" : 1/4" : 999Set 3 Press the Enter key. 4 Use the numeric keys to set the maximum number of copies (1 to 999). Copy limit: 999 sets # keys 5 Press the Enter key. 6 Press the Reset key. The message display returns to the copier basic - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 108
Original Orientation • Auto Sleep Time • Auto Low Power Time • Copy Output Destination • Fax Output Destination • Default Operation Mode • Key Sound • Date and Time • Display Contrast Adjustment • Administrator Management Code Change • Auto Sleep • Auto Clear • Auto Clear Time • Silent Mode How to - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 109
code is accepted, the Machine default screen is displayed. Next, perform the setting referring to the following description of each setting item. Machine default key. 6 Press the Reset key. The message display returns to the copier basic screen. Paper Size (cassettes 1 to 4) Set the paper sizes - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 110
Reset key. The message display returns to the copier basic screen. Multi-Bypass Tray Confirmation Display Select whether or not to display the Bypass Paper size screen when pressing the Paper Select key to select the multi-bypass tray. 1 Display the Machine default screen. (See How to Display the - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 111
. System Menu Check bypass sizing: * Off On 5 Press the Enter key. 6 Press the Reset key. The message display returns to the copier basic screen. Paper S key or the T key to select P.type (Weight). Machine default: Paper Type(4th) Check Bypass P. type (Weight) : Plain : Off 3 Press the Enter - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 112
Screen on page 3-12.) 2 Press the S key or the T key to select P.type(Duplex). Machine default: Check Bypass : Off P. type (Weight) P. type (Duplex) 3 Press the Enter key. 4 Press the S Press the Enter key. 10 Press the Reset key. The message display returns to the copier basic screen. 3-16 - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 113
S key or the T key to select Special P.type. Machine default: P. type (Weight) P. type (Duplex) Special P. type : Fast Mode 3 Press the Enter key. 4 Press the S key or the T key to select Match Print Direction or Fast Mode. Specific Paper Type: Match Print Direction * Fast Mode 5 Press the - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 114
to the copier basic screen. operation of this machine, disable this function. It is recommended, however, to set a longer time before disabling this function. • On the inch specification machine, if you have disabled the auto sleep function, this item is not displayed. 1 Display the Machine default - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 115
Specification - 1 to 240 minutes (in 1 minute increments) Metric Specification - 1 to 120 minutes (in 1 minute increments) 1 Display the Machine default screen. (See How to Display the Machine Default key. The message display returns to the copier basic screen. Copy Output Destination Set the - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 116
Output 5 Press the Enter key. 6 Press the Reset key. The message display returns to the copier basic screen. Default Operation Mode Select the default screen to be displayed when the power is turned on from the copy screen or the fax screen. Note 1 2 This item is displayed only if the optional - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 117
The message display returns to the copier basic screen. Key Sound Select whether or not to enable the beep sound that will be emitted each time a key on the operation panel is pressed. 1 Display the Machine default screen. (See How to Display the Machine Default Screen on page 3-12.) 2 Press the - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 118
Press the Reset key. The message display returns to the copier basic screen. Display Contrast Adjustment Adjust the display contrast if the message display is indistinct. 1 Display the Machine default screen. (See How to Display the Machine Default Screen on page 3-12.) 2 Press the S key or the - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 119
Machine default: Date/Time Display Contrast PIN # Change : 08:48 : 3 Press the Enter key. 4 Use the numeric keys to input the new administrator management code. Management code change: 1600 # keys 5 Press the Enter key. 6 Press the Reset key. The message display returns to the copier basic - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 120
Basic Operation Guide, Auto Clear Function) that will be activated when the preset time elapses after copying is complete. 1 Display the Machine default screen. (See How to Display the Machine Default Screen on page 3-12.) 2 Press the S key or the T key to select Auto Clear. Machine default: PIN - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 121
System Menu Silent Mode This mode reduces operating noise of this machine. Use this mode if the operating noise of this machine is annoying. 1 Display the Machine default screen. (See How to Display the Machine Default Screen on page 3-12.) 2 Press the S key or the T key to select Silent Mode. - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 122
Paper size: Input Size 3-26 5 Press the Enter key. The Bypass Paper type screen is displayed. Proceed to Paper Type described below. Selecting a Size from Other Regular Sizes Sizes that can be set: Inch Specification - A3, B4, B5R, B5, A5R, B6R, A6R, HAGAKI, Folio, Executive, ISO B5, Envelope - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 123
Size 5 Press the Enter key. 6 Press the S key or the T key to select the paper size. Other Regular Size: 7 Press the Enter key. The Bypass Paper type screen is displayed. Proceed to Paper Type described below. Inputting a Paper Size 1 Press the System Menu/Counter key. 2 Press the S key or the - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 124
Paper Type To set the paper type to be used in the multi-bypass tray, continue the procedure from Paper Size setting. Paper types that 8) 1 Press the S key or the T key to select the paper type. Bypass Paper type : * Plain Transparency Preprinted 2 Press the Enter key. The message display returns to - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 125
and Printing the Total Counter You can browse the total count on the operation panel. Also you can output it as a counter report. Browsing the Total Counter Note You can browse the output counter and the scanning counter. 1 Press the System Menu/Counter key. 2 Press the S key or the T key - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 126
System Menu 6 Press the Reset key. The message display returns to the copier basic screen. Example: Counter report 3-30 - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 127
Report Output You can output the following reports from the operation panel. Copy status report System Menu Machine status report 3-31 - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 128
coverage report Copy toner coverage report Printer toner coverage report Fax toner coverage report Press the System Menu/Counter key. 2 Press the S key or the T key to select Print Report. System Menu / Counter: Bypass setting Counter check Print Report 3 Press the Enter key. 4 Press the S key - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 129
Language. System Menu / Counter: End Language Bypass setting 3 Press the Enter key. 4 Press the S key or the T key to select the language to use. Language: * English Francais Espanol 5 Press the Enter key. The message display returns to the copier basic screen, and the language for the - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 130
drum refresh. It takes approximately two minutes. Note Ensure that A3, A4, 11 × 17" (Ledger), or 11 × 8 1/2" paper is set in the multi-bypass tray. 1 Press the System Menu/Counter key. 2 Press the S key or the T key to select User Adjustment. System Menu / Counter: Machine default Printer default - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 131
machine. The principal functions that can be set are shown below. • Job Accounting Mode • Managing Accounts • All Account Management • Individual Account Management • Enabling Job Accounting • Default Settings • Using Job Accounting 4-1 - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 132
managing accounts, you must change Copier Job Accounting and Printer Job Accounting from Off to On in the default settings. If the optional network scanner kit or fax kit is installed, set Scanner Job Accounting or Fax Job Accounting in the default settings to On. (See Default Settings on page 4-13 - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 133
Counter check Print Report Job Accounting 3 Press the Enter key. 4 Use the numeric keys to input the four-digit management code. The management code at the Enter pin code using # key. factory default setting is 1600 for the 16 ppm model, 2000 for the 20 ppm model, and 2500 for the 25 ppm model - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 134
Enter key. 6 Use the numeric keys to input a one- to eight-digit ID-code. A code from 0 to 99999999 can be input. New registration: Account ID Note If you try to register an ID S key or the T key to select End. Limit in use: End Copy Printer : Able use : Able use 10 Press the Enter key. 4-4 - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 135
for copying and printing respectively. For details, refer to the KM-NET for Accounting Operation Guide. Copy Restriction You can select whether to permit or prohibit copying. Note This item is displayed if Copier Job Accounting in the default settings is set to On. (See page 4-13.) 1 Display the - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 136
to the Limit in use screen. Print Restriction You can select whether to permit or prohibit printing. Note 1 2 This item is displayed if Printer Job Accounting in the default settings is set to On. (See page 4-14.) Display the Limit in use screen referring to steps 1 to 7 of Registering a New - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 137
displayed if Scanner Job Accounting in the default settings is set to On. (See page 4-14.) Display the Limit in use screen referring to steps 1 to 7 of Registering a New Account. Press the S key or the T key to select Scanner TX [Scan. Trans]. Limit in use Printer Output limit Scanner TX : Able - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 138
permitted. Fax Transmitting: * No limit Counter limit Is not permitted 5 Press the Enter key. If you have selected Counter limit, the Counter limit Default Value key. 6 Press the S key or the T key to select the ID-code to delete. Delete: End 11111111 22222222 : 123.456 : 000.234 7 Press - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 139
Copier Job Accounting and Printer Job Accounting in the default settings from Off to On. If the optional network scanner kit or fax kit is installed, set Scanner Job Accounting or Fax Job Accounting in the default settings to On. (See Default select the ID-code to change. After all operation of - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 140
Job Accounting All Account Management You can browse the total output count, output the job accounting report, and clear the counter for all accounts. 1 Display the Job Accounting screen. (See How to Display the Job Accounting Screen on page 4-3.) 2 Press the S key or the T key to select Job - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 141
To clear the counter, press the S key or the T key to select the ID-code. 6 Press the Enter key. The confirmation screen is displayed. Clear counter? Yes No or the T key to select Yes. 8 Press the Enter key. 9 After all operation is complete, press the S key or the T key to select End. Each Job - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 142
T key to select Off or On. Job Accounting: Off * On 5 Press the Enter key. 6 Press the Reset key. If you have selected On, the ID-code input screen is displayed. Enter Account ID. :Confirm 4-12 - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 143
. You can set the following items in default settings. • Copier Job Accounting (page 4-13) • Printer Job Accounting (page 4-14) • Scanner Job Accounting (page 4-14) • Fax Job Accounting (page 4-15) • Operation against Excess over Limit (page 4-16) Copier Job Accounting You can select whether or not - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 144
or the T key to select Off or On. Printer Job Accounting: Off * On 7 Press the Enter key. 8 Press the S key or the T key to select End. Job Accounting Default Setting End Copy Job Account. : On Prnt Job Account. : On 9 Press the Enter key. Scanner Job Accounting You can select whether or not to - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 145
Job Accounting Job Accountg Def. Set. 3 Press the Enter key. 4 Press the S key or the T key to select Fax Job Accountng. Job Accounting Default Setting Prnt Job Account. : On Scanner Job Accnt : On Fax Job Accountng : On 5 Press the Enter key. 6 Press the S key or the T key to select Off or On - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 146
by prohibiting immediately use of the machine, to stop the operation from the next job or to display a warning message the S key or the T key to select Excess limit Set. Job Accounting Default Setting Scanner Job Accnt : On Fax Job Accountng : On Excess limit Set. : Prohibit 5 Press the Enter - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 147
sound is emitted. Input the correct ID-code. 2 Perform normal copier operation. 3 After copying is complete, press the Job Accounting key. Printer Operation Under job accounting, operation on the computer is required for printing. For details, refer to the KX Printer Driver Operation Guide. 4-17 - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 148
Job Accounting 4-18 - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 149
Appendix This appendix explains the following topics. • Paper • Specifications • Copier Function Combination Chart • Glossary Appendix-1 - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 150
is good and paper powder is not extremely much. • For problems caused by use of off-specification paper, Kyocera Mita shall not be liable. Available Paper Types Use copy paper for normal xerographic copiers and page printers (standard paper). The paper quality has an influence on print quality - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 151
or print quality problems such as blurring because of poor toner fusing. The recommended basis weight is between 60 and 105 g/m² (16 and 28 lb/ream) for the cassette and between 45 and 160 g/m² (12 and 42 lb/ream) for the multi-bypass tray. Thickness Paper used by the printer - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 152
grain). Since short grain paper may cause a problem in paper feeding, use long grain paper. Other Specifications Porosity: Indicates the density of paper fiber. Stiffness , paper is given an electrostatic charge to attract the toner. Therefore, select the paper that discharges the static electricity - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 153
For these types of paper, use paper specified for copiers or page printers. When using transparencies, labels, thin paper, envelopes, Specifications Must withstand heat at least 190 °C. 0.100 to 0.110 mm Polyester ±0.7 mm 90° ±0.2° To avoid problems, feed transparencies from the multi-bypass - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 154
drum or rollers and peeled labels remaining in the machine may cause a failure. When printing onto labels, you must be liable for the print quality and possible trouble the following specifications. Item Specifications Top sheet loading them in the multi-bypass tray. Set the postcards after - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 155
paper upward by several millimeters at the front end as shown in the illustration and set the paper in the multi-bypass tray. Color paper Color paper must satisfy the specifications listed in the table on page 2 of the Appendix. In addition, the pigments in the paper must be able to withstand - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 156
temperature: around 73.4 °F (23 °C), humidity: around 50 %) Memory For copier 64 MB For printer 64 MB Additional memory For copier: 16 MB, 32 MB, 64 MB, and 128 MB For printer: 32 MB, 64 MB, 128 MB, and 256 MB Operating environment Temperature 10 to 32.5 °C Relative humidity 15 to 80 - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 157
Appendix Copier Functions Copying speed Platen (1:1) Document processor (1:1) First copy time Resolution seconds or less (1:1, A4/11 × 8 1/2") 25 ppm model 5.0 seconds or less (1:1, A4/11 × 8 1/2") Scanning: 600 × 600 dpi Printing: 600 × 600 dpi 1 to 999 sheets Any ratio from 25 to 200 % - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 158
Appendix Printer Functions Printing speed First print time Resolution Applicable OS Interface Same as Copying 10.x UNIX/Linux Parallel interface: 1 (based on IEEE1284) Network interface: 1 USB 2.0: 1 (USB Hi-Speed) Network interface card (optional): 1 Document Processor (optional) Original feed - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 159
Duplex Unit (optional) System Paper sizes Acceptable paper Dimensions (W) × (D) × (H) Weight Finisher (optional) Number of trays Paper sizes Acceptable paper Dimensions (W) × (D) × (H) Weight Job Separator (optional) Number of trays Tray capacity Paper sizes Acceptable paper Dimensions (W) × (D) × - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 160
Appendix Environmental Specifications Recovery time from the low power mode Transition time to the low power mode (at % recycled pulp may be used with this product. Note Please consult with your dealer or service representative for information on the recommended types of paper, etc. Appendix-12 - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 161
Copier Manual zoom mode (zoom mode, preset zoom) Paper selection Multi-bypass double-page spread to 1-sided) Margin mode Border erase mode (sheet erase) Border erase mode (book erase) Combine copying Interrupt mode 1 Image quality (text + photo) - 1NYYYYYYYYYYYYYYYYYYYYYYYYYYYY 2 Image quality ( - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 162
because the orientation in the border erase mode (book erase) is fixed to rear. 6 The quality mode for photo. For other modes, the manual exposure mode is canceled and the auto exposure mode be canceled. 46 Copying is not available with multi-bypass tray setting (universal size, size input). (An - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 163
. (Copying is performed without offset.) Offset copy with the finisher is not available. (An error message is displayed.) 49 Copying is not available with multi-bypass tray setting (universal size). (An error message is displayed.) Appendix-15 - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 164
router, that serves as the entrance/exit (gateway) for accessing computers outside of your network. When no specific gateway is designated for a destination IP address, data is sent to the host that is designated as the Default Gateway. DHCP (Dynamic Host Configuration Protocol) This is a protocol - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 165
from a printer driver over the Internet or an intranet and via an IPP port. Using IPP, output to a remote printer is possible over the Internet. KIR This is Kyocera Mita's original smoothing function. It uses software to enhance the printer's resolution and produce high-quality printing. The default - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 166
source settings. You can print the status page from the operation panel of this machine. Subnet Mask This is a 32-bit numerical value that defines which bits of the IP address specify the network address for identifying the network. TCP/IP (Transmission Control Protocol/Internet Protocol) TCP/IP is - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 167
3-11 Book erase ...1-27 Border erase mode ...1-27 Border erase width default value 3-10 Borderline ...1-24 C Carriage return (CR) action 2-33 Code job list ...2-12 Code set ...2-28 Color paper ...Appendix-7 Combine copying ...1-20 Continuous copying ...1-28 Copier default settings ...3-2 Copier - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 168
gateway ...2-20 Default magnification ...3-6 Default operation mode ...3-20 Default setting mode ...3-2 Default settings ...4-13 Deleting an account ...4-8 DHCP ...2-19, Appendix-16 Display contrast adjustment 3-22 Document processor Appendix-10 dpi ...Appendix-16 Drum refresh ...3-34 Duplex - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 169
Interrupt mode ...1-11 IP access control ...Appendix-16 IP address ...2-19, Appendix-17 Printer ...Appendix-17 Low power mode ...Appendix-17 M Machine default settings ...3-12 Machine status report ...3-31 Managing accounts ...4-4 Manual exposure mode ...1-6 Margin mode ...1-26 Margin width default - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 170
copying ...1-18, 3-9 Operation against excess over code jobs ...2-14 Photo ...1-5 Postcard ...Appendix-6 PostScript ...Appendix-18 PPM ...Appendix-18 Preprinted paper ...Appendix-7 Preset zoom mode ...1-9 Print restriction ...4-6 Printer driver ...Appendix-18 Printer functions ...Appendix-10 Printer - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 171
job accounting ...4-14 Scanner transmission limit ...4-7 Service status page ...2-56 Sheet erase ...1-27 Silent Mode ...3-25 Sleep mode ...Appendix-18 SMTP ...Appendix-18 SNMP ...Appendix-18 Sort copying ...1-17 Special paper ...Appendix-5 Specifications ...Appendix-8 Split copying ...1-15 Staple - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 172
Index Index-6 - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 173
For best print results and machine performance, we recommend that you use only KYOCERA MITA original supplies for your KYOCERA MITA products. - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 174
- Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 175
©2004 is a trademark of Kyocera Corporation - Kyocera KM-1650 | 1650/2050/2550 Operation Guide (Advanced) - Page 176