Kyocera TASKalfa 4500i Kyocera Command Center RX User Guide Rev-1.2 - Page 46

Settings Pages 6-24 3 After you have finished selection, click Submit. 4 The Action Settings > Forward page appears. Check that the Destination is added to the Destination List. Deletion You can delete a Destination from the Destination List. Open the Action Settings > Forward page. 1 Put a check mark in the check box for the destination you want to delete from the Destination List. 2 After you have finished selection, click Delete. The Action Settings > Forward - Delete page appears. You can confirm the destinations to be deleted. 3 After you have finished selection, click Submit. 4 The Action Settings > Forward page appears. Check that the Destination is deleted from the Destination List. After confirming the settings, click Submit. FAX / i-FAX > FAX > Defaults The description below provides a summary of the items displayed on the FAX / i-FAX > FAX > Defaults page. Local FAX Number (Port 1/ 2) Specifies your FAX system number. FAX Line Sets the type of phone line to correspond to the type of telephone service that you are using. Be sure that the type of phone line you select is correct because, if the setting is incorrect, dialing will be impossible. The choices are Tone (DTMF) or Pulse (10pps), or Pulse (20pps). Local FAX ID Specifies your FAX system ID. Speaker Volume Sets the volume of the internal speaker that allows you to listen to the other party or to verify the conditions on the telephone line when the [On-Hook] key was pressed. The choices are Off and levels 1 through 5. Monitor Volume Sets the volume of the internal speaker that allows you to verify the FAX tones during FAX communication. The choices are Off and levels 1 through 5. FAX / i-FAX > FAX > Receive The table below provides a summary of the items displayed on the Receive page. FAX Receive Selects the FAX reception mode. The choices are Auto (Normal, FAX/TEL, TAD or DRD) or Manual. (The selectable option is different depending on the destination.) User Guide