Kyocera TASKalfa 4500i Kyocera Command Center RX User Guide Rev-1.2 - Page 62
Advanced > Management > SNMP > SNMPv3, Trap IP Address IPv6
View all Kyocera TASKalfa 4500i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Settings Pages Enter the IPv4 address that receives traps. Select On to enable trap receiving. Trap IP Address (IPv6) Enter the IPv6 address that receives traps. Select On to enable trap receiving. Trap IPX Address Enter the IPX address that receives traps. Select On to enable trap receiving. Selected Errors Select the events which will cause a trap to be generated from Add Paper, Low Toner, Add Toner, Cover Open, Paper Jam, and All Other Errors. Advanced > Management > SNMP > SNMPv3 The section below provides a summary of the items displayed on the SNMPv3 page. After you have changed the setting, you must restart the printing system. SNMPv3 Sets whether to use the SNMPv3 protocol. Set On to use it. Authentication Sets whether to authenticate the user in SNMP communication. Hash Selects the hash algorithm. This item is displayed when the Authentication is On. Privacy Sets whether to encrypt the communicated data in SNMP communication. This becomes available when Authentication is enabled. Encryption Selects the encryption algorithm. This item is displayed when Privacy is On. User Name Enter the name of the read-only user. Password Enter the password for the read-only user. User Name Enter the name of the read/write user. Password Enter the password the read/write user. Advanced > Management > LDAP > General The printing system can refer to the address book which is on the LDAP server as an external address book and assign a FAX number and E-mail address to the destination. LDAP Enables or disables access to the LDAP protocol. LDAP Server Name Specifies a name or IP address for the LDAP server. 6-40 User Guide