Kyocera TASKalfa 4500i Kyocera Command Center RX User Guide Rev-1.2 - Page 71

Settings Pages Selects the hash algorithm. • Encryption Selects the encryption algorithm. (When ESP is selected under Protocol.) • PFS When PFS is set to On (enabled), even if a key is decrypted, the decrypted key cannot be used to decrypt the other keys generated after the decryption. This improves the safety, but imposes a heavy burden because of more keygeneration processes. • Diffie-Hellman Group The Diffie-Hellman key-sharing algorithm allows two hosts on an unsecured network to share a private key securely. Select the Diffie-Hellman group to use for key sharing. • Lifetime Measurement Specifies whether the lifetime is measured by time or by time and data size. • Lifetime (Time)/Lifetime (Data Size) Specifies the lifetime of an IPSec SA. Lifetime Measurement allows you to select whether to use time or data size to specify the lifetime. When you select Time & Data Size, an SA is disabled and updated when either the time or data size of the SA exceeds the specified value. • IP Version Specifies the IP version of the other end. Select IPv4 or IPv6. • IP Address (IPv4) Specifies the IPv4 addresses of the hosts or network with which the print system is connecting via IPSec. When you are restricting the scope of IPSec, be sure to specify the IP addresses. If this field is blank, all IPv4 addresses will be allowed to connect the print system. • IP Address (IPv6) Specifies the IPv6 addresses of the hosts or network with which the print system is connecting via IPSec. When you are restricting the scope of IPSec, be sure to specify the IP addresses. If this field is blank, all IPv6 addresses will be allowed to connect the print system. • Subnet Mask When IPv4 is selected for IP Version, this specifies the subnet mask of the hosts or network with which the print system is connecting via IPSec. If this field is blank, the specified addresses are considered to be host addresses. • Prefix Length When IPv6 is selected for IP Version, this specifies the prefix length of the hosts or network with which the print system is connecting via IPSec. If this field is blank, the specified addresses are considered to be host addresses. Advanced > Link > HyPAS Device Online This page allows you to configure the environment to execute HyPAS applications. Application Displays the number and status of HyPAS applications running in the printing system. Clicking on the application's name or ID in Application List shows details for the application. Certificate COMMAND CENTER RX 6-49