Kyocera TASKalfa 500ci 250ci/300ci/400ci/500ci/552ci Operation Guide Rev-1 - Page 146

Copying Functions Form Overlay Forms Original Density :30% Copy Density :100% Copy the original images onto the form. Once you scan and register the form, the form is overlaid onto the original. You can also use a form that is already registered in the machine's memory. NOTE: To register a form in advance, refer to Form for Form Overlay Box on page 6-17 for details. Follow the steps as below for form overlay. Ready to copy. Form Overlay Off Place original. Select Stored Form Scan New Form Original Zoom Paper : --- : 100% : --- Preview Status Add Shortcut Ready to copy. Form Overlay - Select Form Document Box Box Name Form for Form Overlay Custom Box Status Copies 1 Density (10 㵨 30, 100) 10 % Cancel None Select Form OK 10/10/2008 10:10 Copies 1 Up Detail 1/1 Preview Open Cancel OK 10/10/2008 10:10 1 Press the Copy key. 2 Press [Layout/Edit] and then [Form Overlay]. 3 Press [Scan New Form] to use the first page of originals as a form. NOTE: You can select the form density setting through 4 levels from 10%, 20%, 30% or 100%. Press the [+] or [-] buttons in Density. To use the forms already registered, press [Select Stored Form]. Press [Select Form] to display the document boxes that store documents which can be used as a form. Select the desired form from the list and press [OK]. NOTE: To return to a higher level folder, press [Up]. 4 Press [OK]. 5 Place the originals. Place the original for the form on top of the other originals. When using the optional document processor, the first page of the originals should be placed on the top. 6 Press the Start key to start copying. 4-22