Kyocera TASKalfa 500ci 250ci/300ci/400ci/500ci/552ci Operation Guide Rev-1 - Page 150

Copying Functions Poster Original Copy For using this device to make copies larger than the maximum paper size, use Poster mode to separate and copy an enlarged image onto multiple pages. The completed copies have overlapping areas. A single large page can be created by pasting those areas together. Choose one of the following 3 enlargement settings: • Copy size - The output paper size is chosen from the following sizes. Copy is enlarged according to the selected paper size. Model Type Inch models Metric models Paper size 34 × 44", 22 × 34", 17 × 22" A0, A1, A2 • Zoom prioirty - Specify the output zoom size from 100 to 400%. Image will be output on the necessary number of copies for the specified zoom size. • Number of sheets - Select number of sheets to split the image from 2, 4, or 8 sheets. Copy is enlarged according to the selected number. NOTE: The available original sizes are 11 × 17", 8 1/2 × 11", A3 and A4R. The available paper sizes are 11 × 17" and A3 only. Follow the steps as below to use poster enlargement. 1 Press Copy key. 2 Place the originals on the platen. 3 Press [Layout/Edit] and then press [Poster]. Ready to copy. Poster Off Place original. Original Zoom Paper : --: 100% : --- Preview Status Add Shortcut Copy Size Zoom Priority Number of Sheets Copies Separate and copy an image suitable for the selected copy size. 34x44" 22x34" Cancel 17x22" OK 10/10/2008 10:10 4 Select enlargement method. If [Copy Size] is selected, set the output paper size. If [Zoom Priority] is selected, set the output zoom size. If [Number of Sheets] is selected, set the number of split pages. 5 Press [OK]. 6 Press the Start key. Copying begins. 4-26