Kyocera TASKalfa 500ci 250ci/300ci/400ci/500ci/552ci Operation Guide Rev-1 - Page 258
Original Orientation, Continuous Scan, Description, Default Setting System Menu,
View all Kyocera TASKalfa 500ci manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 258 highlights
Default Setting (System Menu) Original Orientation Set the original orientation defaults. The available default settings are shown below. Item Top Edge Top Top Edge Left Description Select the original's top edge at the top. Select the original's top edge at the left. Refer to page 4-9 for Original Orientation. Use the procedure below to select the default orientation when originals are placed on the platen. 1 Press the System Menu key. 2 Press [Common Settings], [ ], [Next] of Function Defaults and then [Change] of Original Orientation. 3 Select [Top Edge Top] or [Top Edge Left] for the default. 4 Press [OK]. Continuous Scan Set the continuous scan defaults. The available default settings are shown below. Item Off On Description Continuous scan not performed Continuous scan performed Refer to page 4-9 for Original Orientation. Use the procedure below to select the default settings for continuous scanning. 1 Press the System Menu key. 2 Press [Common Settings], [ ], [Next] of Function Defaults and then [Change] of Continuous Scan. 3 Select [Off] or [On] for the default. Use the procedure below to select the default quality setting for originals. 4 Press [OK]. 8-16