Kyocera TASKalfa 500ci 250ci/300ci/400ci/500ci/552ci Operation Guide Rev-1 - Page 52
Preparation before Use, Restarting the System on Network, TCP/IP Setting, TCP/IP, Bonjour
View all Kyocera TASKalfa 500ci manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Preparation before Use 13 Check if all the address entries are correct and press [OK]. 14 After changing the setting, restart the system or turn the machine OFF and then ON again. For detailed information on restarting the system, refer to Restarting the System on page 8-72. DHCP Settings Select whether or not to use the DHCP server. The default setting is On. Use the procedure below. 1 Press the System Menu key. 2 Press [System], [Next] of Network and then [Next] of TCP/IP Setting. 3 Press [Change] of TCP/IP. 4 Press [On] and then press [OK]. 5 Press [Change] of IPv4. 6 Press [DHCP]. 7 Press [On] or [Off] of DHCP and then press [OK]. 8 After changing the setting, restart the system or turn the machine OFF and then ON again. For detailed information on restarting the system, refer to Restarting the System on page 8-72. Bonjour Settings Select whether or not to use Bonjour. The default setting is Off. Use the procedure below. 1 Press the System Menu key. 2 Press [System], [Next] of Network and then [Next] of TCP/IP Setting. 3 Press [Change] of TCP/IP. 4 Press [On] and then press [OK]. 5 Press [Change] of IPv4. 6 Press [Bonjour]. 7 Press [On] or [Off] of Bonjour and then press [OK]. 2-14