Kyocera TASKalfa 500ci 250ci/300ci/400ci/500ci/552ci Operation Guide Rev-1 - Page 318
NetWare Setup, AppleTalk Setup, WSD Scan Setup, Default Setting System Menu, Network, SMTP E-mail TX
View all Kyocera TASKalfa 500ci manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 318 highlights
Default Setting (System Menu) Use the procedure below. The following procedure is an example for specifying the SMTP (E-mail TX) settings. 1 Press the System Menu key. 2 Press [System] and then [Next] of Network to display the network settings screen. 3 Display the item you want to set and press [Change] for that item. In this example, press [Change] of SMTP (E-mail TX). 4 Press [On] or [Off]. 5 Press [OK]. 6 After changing the setting, restart the system or turn the machine OFF and then ON again. For detailed information on restarting the system, refer to Restarting the System on page 8-72. NetWare Setup Select the NetWare network connection. After that, select frame types for NetWare network from Auto, Ethernet-II, 802.3, 802.2, or SNAP. The default settings are "On, Frame Type: Auto". Use the procedure below. 1 Press the System Menu key. 2 Press [System], [Next] of Network and then [Change] of NetWare. 3 Press [On]. 4 Press the key for the frame type you want to use. 5 Press [OK]. 6 After changing the setting, restart the system or turn the machine OFF and then ON again. For detailed information on restarting the system, refer to Restarting the System on page 8-72. AppleTalk Setup Select the Apple Talk network connection. Refer to AppleTalk Setup on page 2-15 about the procedures. WSD Scan Setup Select whether or not to use WSD Scan. The default setting is On. Use the procedure below. 1 Press the System Menu key. 2 Press [System], [Next] of Network and then [Change] of WSD Scan. 3 Press [On] or [Off]. 4 Press [OK]. 5 After changing the setting, restart the system or turn the machine OFF and then ON again. For detailed information on restarting the system, refer to Restarting the System on page 8-72. 8-76