Kyocera TASKalfa 500ci 250ci/300ci/400ci/500ci/552ci Operation Guide Rev-1 - Page 261
Default Setting System Menu, Function Defaults, File Format, File Separation
View all Kyocera TASKalfa 500ci manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 261 highlights
Default Setting (System Menu) Use the procedure below to select the default file format. 1 Press the System Menu key. 2 Press [Common Settings], [ ], [Next] of Function Defaults and then [Change] of File Format. 3 Select the default file format. 4 Press [OK]. File Separation Select the default file separation setting. The available default settings are shown below. Item Off Each Page Description No file separation performed (all the pages are compiled in one file). Each scanned page is created into a separate file. NOTE: Refer to page 5-13 for file separation. Use the procedure below to select the default file separation. 8 1 Press the System Menu key. 2 Press [Common Settings], [ ], [Next] of Function Defaults and then [Change] of File Separation. 3 Select the default for [Off] or [Each Page]. 4 Press [OK]. Density Set the default density. The available default settings are shown below. Item Manual (Normal 0) Auto Description Set to (Normal 0) in the Manual density. Set to Auto density. NOTE: You cannot specify the density if you have selected [Full Color], [Auto Color (Color/Gray)], or [Grayscale] in Color Select.(Send/Store). Use the procedure below to select the default density. 1 Press the System Menu key. 2 Press [Common Settings], [ ], [Next] of Function Defaults, [ ] and then [Change] of Density. 3 Select the default density. 4 Press [OK]. 8-19