Kyocera TASKalfa 500ci 250ci/300ci/400ci/500ci/552ci Operation Guide Rev-1 - Page 316
Manual Setting IPv6, RA Stateless Settings, DHCP IPv6 Settings, TCP/IP IPv6
View all Kyocera TASKalfa 500ci manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 316 highlights
Default Setting (System Menu) Manual Setting (IPv6) Manually specify the IP address, prefix length, and gateway address of TCP/IP (IPv6). The manual setting is available when selecting [On] for TCP/IP (IPv6). Use the procedure below. 1 Press the System Menu key. 2 Press [System], [Next] of Network and then [Next] of TCP/IP Setting. 3 Press [Next] of IPv6. 4 Press [Next] of Manual Setting. 5 Press [IP Address (Manual)] to enter IP address. The format of the IPv6 address is a sequence of numbers (128 bit in total) separated by colons, e.g. 2001:db8:3c4d:15::1a2c:1a1f. 6 Press [OK]. Press [# Keys] of Prefix Length (0 - 128) to enter the prefix length using the numeric keys. 7 Press [Default Gateway] to enter the default gateway. 8 Check that all the entries are correct and Press [OK]. 9 After changing the setting, restart the system or turn the machine OFF and then ON again. For detailed information on restarting the system, refer to Restarting the System on page 8-72. RA (Stateless) Settings Select whether or not to use RA (Stateless). The RA (Stateless) settings are available when selecting [On] for TCP/IP (IPv6). The default setting is On. Use the procedure below. 1 Press the System Menu key. 2 Press [System], [Next] of Network and then [Next] of TCP/IP Setting. 3 Press [Next] of IPv6. 4 Press [Change] of RA(Stateless). 5 Press [On] or [Off] of RA (Stateless). When selecting [On], IP Address 1 to 5 (Stateless) appears. 6 Press [OK]. 7 After changing the setting, restart the system or turn the machine OFF and then ON again. For detailed information on restarting the system, refer to Restarting the System on page 8-72. DHCP (IPv6) Settings Select whether or not to use the DHCP (IPv6) server. The DHCP (IPv6) Settings are available when selecting [On] for TCP/IP (IPv6). The default setting is On. Use the procedure below. 1 Press the System Menu key. 2 Press [System], [Next] of Network and then [Next] of TCP/IP Setting. 3 Press [Next] of IPv6. 4 Press [Change] of DHCP. 5 Press [On] or [Off] of DHCP. When selecting [On], IP Address (Stateful) appears. 8-74