Kyocera TASKalfa 500ci 250ci/300ci/400ci/500ci/552ci Operation Guide Rev-1 - Page 260

Default Setting (System Menu) Use the procedure below to select the default color mode setting. 1 Press the System Menu key. 2 Press [Common Settings], [ ], [Next] of Function Defaults and then [Change] of mode Color Selection(Copy). 3 Select the default color setting. 4 Press [OK]. Color Selection (Send/Store) Select the default color mode for scanning documents. The available default settings are shown below. Color mode Description Auto Color (Color/Gray) Automatically recognize whether the document is color or black and white, and scan color documents in Full Color and black and white documents in Grayscale. Auto Color (Color/B & W) Automatically recognize whether the document is color or black and white, and scan color documents in Full Color and black and white documents in Black and White. Full Color Scan document in full color. Grayscale Scan document in grayscale for smoother and finer finish. Black & White Scan document in black and white. File size is smaller than Full Color or Grayscale. Use the procedure below to select the default color mode. 1 Press the System Menu key. 2 Press [Common Settings], [ ], [Next] of Function Defaults and then [Change] of Color Select.(Send/Store). 3 Select the default color mode. 4 Press [OK]. File Format Select the default file type to send the scanned originals. The available default settings are shown below. Item PDF TIFF JPEG XPS High Comp. PDF Description Send files in PDF format. Send files in TIFF format. Send files in JPEG format. Send files in XPS format. Send files in High Comp. PDF format (refer to page 5-14). NOTE: Refer to page 5-12 for file formats. 8-18