Kyocera TASKalfa 500ci 250ci/300ci/400ci/500ci/552ci Operation Guide Rev-1 - Page 53
Preparation before Use, Restarting the System on Network, TCP/IP Setting, TCP/IP, AppleTalk
View all Kyocera TASKalfa 500ci manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Preparation before Use 8 After changing the setting, restart the system or turn the machine OFF and then ON again. Auto-IP Settings For detailed information on restarting the system, refer to Restarting the System on page 8-72. 2 Select whether or not to use Auto-IP. The default setting is On. Use the procedure below. 1 Press the System Menu key. 2 Press [System], [Next] of Network and then [Next] of TCP/IP Setting. 3 Press [Change] of TCP/IP. 4 Press [On] and then press [OK]. 5 Press [Change] of IPv4. 6 Press [Auto-IP]. 7 Press [On] or [Off] of Auto-IP and then press [OK]. 8 After changing the setting, restart the system or turn the machine OFF and then ON again. For detailed information on restarting the system, refer to Restarting the System on page 8-72. AppleTalk Setup Select the Apple Talk network connection. The default setting is On. Use the procedure below. 1 Press the System Menu key. 2 Press [System], [Next] of Network and then [Change] of AppleTalk. 3 Press [On] or [Off]. 4 Press [OK]. 5 After changing the setting, restart the system or turn the machine OFF and then ON again. For detailed information on restarting the system, refer to Restarting the System on page 8-72. 2-15