LG PQCPA11A0E Owner's Manual - Page 107
Schedule control setup window, Operation mode
View all LG PQCPA11A0E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 107 highlights
3. ACP operation by using the LG ACCS 3 Schedule control setup window It displays the list of the air conditioner group and the air conditioner set at the system. Also, the air conditioiner group and the air conditioner can be selected for setting the schedule. At this window, the operation can be set for the air conditioner to be controlled at the specified time according to the schedule. The following operations can be controlled. Operation mode The operation method of the air conditioner can be set at the operation mode. The operation modes to set are as follows: Item Description It operates the cold operation. The cold operation can set the desired temperature to 18°C ~ 30°C. Note: Setting the desired temperature Because too much cooling is harmful for health, set the suitable desired temperature. About 5°C is better for the difference between the indoor temperature and the outdoor temperature. If the desired temperature is higher than the indoor temperature during the cold operation, it does not operate the cold operation, but the ventilation. It drives the heating operation. The heating operation can set the desired temperature to 18°C ~ 30°C. Note: Setting the desired temperature The excessive heating is harmful for the health, so set the suitable desired temperature. About 5°C is better for the difference between the indoor temperature and the outdoor temperature. If the desired temperature is lower than the indoor temperature during the heating operation, it does not operate the heating operation, but the ventilation. The dehumidification eliminates moisture. It can effectively eliminate moisture during the rainy season or at the high humidity condition. When it is selected, the desired temperature can not be set. It circulates the fresh air. The ventiliation only may be used in Spring and Autumn. When it is selected, the desired temperature can not be set. Installation/Owner's Manual 3-25