LG PQCPA11A0E Owner's Manual - Page 15

2. Installing ACP This chapter describes how to install the ACP to use. 2. Installing ACP Caution: Installing the ACP The ACP installation work needs the professional technique. Therefore, the installation described at this chapter should be performed by the certified installation professional. Consult the service center or the professional installation agency certified by us about any question or request related to the installation. In order to use the ACP, the environment for the ACP, the indoor unit and the ventilator to communicate should be built and the indoor unit should be registered. In order to use the ACP, the installation should be performed by the following order. STEP 1. Check the environment before installing the ACP Before installing the ACP, check the network configuration according to the interconnection between the ACP and the external device. STEP 2. Set the indoor unit address and Connecting the PI485 Set the address of the ACP not overlapped with the connecting indoor unit and connect the PI485. STEP 3. Install the ACP and set the environment and the function Install the ACP and set the network environment and the function. STEP 4. ACCS access and Information input Set the access environment at the LG ACCS, the ACP operation program and enter the air conditioner information. STEP 5. Make sure and check the ACP installation Make sure and check that the ACP is normally installed. Installation/Owner's Manual 2-1