LG PQCPA11A0E Owner's Manual - Page 54

2. Installing ACP Setting whether to use the wattage display function or not The LG ACCS, the operation program of the ACP, offers the wattage display interconnection function to check and manage the wattage of the indoor unit of the air conditioner connected to the ACP. Caution: Wattage display interconnection In order to use the wattage display interconnection function, the wattmeter should be connected and interconnected with the PI485 connecting to the ACP. See the related product manual for the installation and the operation of the wattmeter and the PI485. In order to use the wattage display interconnection function with the wattmeter installed, whether to use it at the ACP or not should be set. Set whether to use the wattage display interconnection function as follows: Set whether to use the wattage display interconnection function as follows: 1. Press the 'MENU/SELECT' button of the ACP and then press Left/Right ( , ) button to display the wattage display setup screen. Press the 'MENU/SELECT' button again. The screen to set whether to use the wattage display or not is displayed. MENU/ SELECT Click MENU /SELECT button [MENU] Set PDI [Set PDI] NOT(0)/USE(1):0 2. Use Up/Down ( , ) button to set whether to use the wattage display function or not. Press the Up ( ) button to use the wattage display function, or press the Down ( ) button not to set the wattage display function. MENU/ SELECT 2-40 ACP [Set PDI] NOT(0)/USE(1):1 Example for setting to use the wattage display function