LG PQCPA11A0E Owner's Manual - Page 44
Setting the gateway address
View all LG PQCPA11A0E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
2. Installing ACP Setting the gateway address After setting the IP address, the gateway address should be set. Set the gateway address as follows: 1. Press the 'MENU/SELECT' button of the ACP and then press Left/Right ( , ) button to display the following Gateway setup screen. Press the 'MENU/SELECT' button again. The screen to enter the gateway address is displayed. MENU/ SELECT 2. Use Up/Down/Left/Right ( Click MENU /SELECT button [MENU] Set GW Address [Set GW Address] 192.168.000.000 ) button to enter the desired gateway address. MENU/ SELECT [Set GW Address] 165.186.002.001 Example to set Gateway address 3. After entering the gateway address, press the 'MENU/SELECT' button to set the entered gateway address. But, there is no 'MENU/SELECT' button pressed for a specific period (about 5 seconds), it returns to the initial screen with the entered gateway address not applied to the system, and the existing set gateway address is used. MENU/ SELECT 2-30 ACP ACP SW ver. 2.77.2