LG PQCPA11A0E Owner's Manual - Page 43
Setting the IP address
View all LG PQCPA11A0E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
2. Installing ACP Setting the IP address In order for the user to use the functions of the ACP via the web, the unique IP address should be given to the ACP. Set the IP address as follows: 1. Press the 'MENU/SELECT' button of the ACP. [MENU] screen is displayed as shown at below. Press the 'MENU/SELECT' button again. The screen to enter the IP address is displayed. MENU/ SELECT 2. Use Up/Down/Left/Right ( Click MENU /SELECT button [MENU] © Set IP Address [Set IP Address] 192.168.000.000 ) button to enter the desired IP address. MENU/ SELECT [Set IP Address] 192.168.002.101 Example to set IP address 3. After entering the IP address, press the 'MENU/SELECT' button to set the entered IP address. But, there is no 'MENU/SELECT' button pressed for a specific period (about 5 seconds), it returns to the initial screen with the entered IP address not applied to the system, and the existing set IP address is used. MENU/ SELECT ACP SW ver. 2.77.2 Installation/Owner's Manual 2-29