Lexmark T642 Service Manual - Page 184
Sensor Test (high capacity output stacker), Sensor Tests (5-bin mailbox), Diverter Test, Sensor Test
UPC - 734646722001
View all Lexmark T642 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 184 highlights
4061-xx0 Sensor Test (high capacity output stacker) 1. Select Sensor Test from OUTPUT BIN TESTS. 2. Select Output Bin x (x=number of the output option to be tested). The following screen is displayed: HC Bin x TP=OPpassThru=Open Full=Open NearFull=Open • TP-High-capacity top position sensor • passThru-High-capacity pass thru sensor • Full-High-capacity bin full sensor (lower part of dual sensor) • NearFull-High-capacity bin near full sensor (upper part of dual sensor) 3. Manually actuate each of the sensors of the high-capacity stacker, and the display by each sensor toggles from Open to Closed. 4. Press Back ( ) or Stop ( ) to exit the test. Sensor Tests (5-bin mailbox) 1. Select Sensor Tests from OUTPUT BIN TESTS. 2. Select Output Bin x (x=number of the output option to be tested). The following screen is displayed: Output Bin x P1=OP P2=OP L=NL • passThru-5-bin mailbox pass thru sensor shows Open or Closed • mailboxEmpty-5-bin mailbox empty sensor shows Normal for a normal level, NearFull for nearly full, and Full for full. 3. Manually actuate each of the sensors of the 5-bin mailbox,. The pass thru sensor will indicate Open or Closed and the empty sensor (mailboxEmpty) indicates Normal, NearFull, or Full. 4. Press Back ( ) or Stop ( ) to exit the test. Diverter Test This test verifies the functioning of each of the 5-bin mailbox output media diverters. If more than one 5-bin mailbox is installed, all installed diverters or tested. To run the Diverter Test, select Diverter Test from the OUTPUT BIN TESTS. The test runs once and stops. 3-16 Service Manual