Lexmark T642 Service Manual - Page 81

4061-xx0 User attendance messages (continued) Error code Sub code Primary message Description/action 56 .xx Standard Parallel Port This error is displayed when data is sent to the printer across the parallel Disabled port, but the parallel port has been disabled. Once this message is displayed, reporting of further errors is suppressed until the menus are entered, or the printer is reset. The following actions may be taken: • Press to clear the message. The printer discards any data received on the parallel port. • Press until Busy/Waiting appears. The following are available: - Reset Printer - Reset Active Bin 56 .xx Parallel Port x Disabled This error is displayed when data is sent to the printer across the parallel port, but the parallel port indicated has been disabled. Once this message is displayed, reporting of further errors is suppressed until the menus are entered, or the printer is reset. The following actions may be taken: • Press to clear the message. The printer discards any data received on the parallel port. • Press until Busy/Waiting appears. The following are available: - Reset Printer - Reset Active Bin 57 .xx Configuration Change The printer has attempted to restore the Print and Hold jobs from the disk and found that some or all of the jobs could not be restored. The printer could not restore jobs from the disk because the configuration of the printer has changed. This message alternates with the secondary message, Held jobs may not be restored. Some configuration changes that may cause this condition are: • Code version change • Paper handling option is removed • Disk has been moved to a different model printer. Press to clear the message. Some of the Print and Hold jobs stored on the disk will not be restored. They remain on the disk, but cannot be accessed. 58 .xx Too Many Trays Attached This error code displays when too many input trays are attached to the printer. 58 .xx Too Many Disks Installed This error displays when too many disks are attached to the printer. 59 .xx Incompatible Output Bin x An incompatible output bin is installed. For Output Bin x, x=1, 2, or 3. Remove the incompatible output bin and press to clear the message. Note: If the user installed the incompatible device to satisfy a Check Device Connections/reattach message, the user should reinstall an associated compatible option or hot unplug the option. 59 .xx Incompatible Envelope An incompatible envelope feeder is installed. Feeder Remove the incompatible feeder and press to clear the message. Note: If the user installed the incompatible device to satisfy a Check Device Connections/reattach message, the user should reinstall an associated compatible option or hot unplug the option. Diagnostic information 2-41