Lexmark T642 Service Manual - Page 80

4061-xx0 User attendance messages (continued) Error code Sub code Primary message 52 .xx Flash Full 53 .xx Unformatted Flash 54 .xx Standard Network Software Error 54 .xx Network x Software Error 55 .xx Unsupported option in Slot x 55 .xx Unsupported Flash in Slot x 56 .xx Standard Serial Disabled 56 .xx Serial Port x Disabled 56 .xx Standard USB Port Disabled 56 .xx Standard USB Port x Disabled Description/action This message displays when there is not enough free space in the flash memory to hold the resources that have been requested to be written to flash. This message displays when the printer detects an unformatted flash at power on. Press to clear the message. The flash is marked as bad and normal operation continues. Flash operations are not allowed until the flash is formatted. This error displays when a network port is detected, but the printer cannot establish communications with it. This error displays when a network port is detected, but the printer cannot establish communications with it. An unsupported option is installed in the specified solutions port. Power off the printer and remove the unsupported option in the specified slot. An unsupported flash option is installed in the solutions port. Power off the printer and remove the unsupported flash option in the specified slot. This error displays when data is sent to the printer across the standard serial port, but the port has been disabled. This error displays when data is sent to the printer across an optional parallel port, but the port has been disabled. Once this message displays, reporting of further errors is suppressed until the menus are entered, or the printer is reset. Displayed when status is requested over the USB port, but the port has been disabled. Once the error has been displayed for the first time, reporting of further errors is suppressed until the menus are entered or the printer is reset. The following actions may be taken: • Press to clear the message. The printer discards any data received on the USB port. • Press until Busy/Waiting appears. The following are available: - Reset Printer - Reset Active Bin Displayed when status is requested over the USB port indicated, but the port has been disabled. Once the error has been displayed for the first time, reporting of further errors is suppressed until the menus are entered or the printer is reset. The following actions may be taken: • Press to clear the message. The printer discards any data received on the USB port. • Press until Busy/Waiting appears. The following are available: - Reset Printer - Reset Active Bin 2-40 Service Manual