Linksys SGE2000 Cisco Small Business SFE/SGE2xxx Series Managed Switches Admin - Page 111
Enhanced Interior Gateway Routing Protocol, Intermediate System - Intermediate System
UPC - 745883572120
View all Linksys SGE2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 111 highlights
Configuring Device Security Defining Access Control 4 - IPV6:ICMP - Matches packets to the Matches packets to the IPv6 and Internet Control Message Protocol. - EIGRP - Enhanced Interior Gateway Routing Protocol (EIGRP). Provides fast convergence, support for variable-length subnet mask, and supports multiple network layer protocols. - OSPF - The Open Shortest Path First (OSPF) protocol is a link-state, hierarchical Interior Gateway Protocol (IGP) for network routing Layer Two (2) Tunneling Protocol, an extension to the PPP protocol that enables ISPs to operate Virtual Private Networks (VPNs). - IPIP - IP over IP (IPIP). Encapsulates IP packets to create tunnels between two routers. This ensure that IPIP tunnel appears as a single interface, rather than several separate interfaces. IPIP enables tunnel intranets occur the internet, and provides an alternative to source routing. - PIM - Matches the packet to Protocol Independent Multicast (PIM). - L2TP- Matches the packet to Layer 2 Internet Protocol (L2IP). - ISIS - Intermediate System - Intermediate System (ISIS). Distributes IP routing information throughout a single Autonomous System in IP networks. - ANY - Matches the protocol to any protocol. • Source Port - Defines the TCP/UDP source port to which the ACE is matched. This field is active only if 800/6-TCP or 800/17-UDP are selected in the Select from List drop-down menu. The possible field range is 0 - 65535. • Dest. Port - Defines the TCP/UDP destination port. This field is active only if 800/6-TCP or 800/17-UDP are selected in the Select from List drop-down menu. The possible field range is 0 - 65535. • Flag Set - Sets the indicated TCP flag that can be triggered. • ICMP Type - Filters packets by ICMP message type. The field values is 0-255. • ICMP Code - Indicates and ICMP message code for filtering ICMP packets. ICMP packets that are filtered by ICMP message type can also be filtered by the ICMP message code. • IGMP Type - Filters packets by IGMP message or message types. • Source Cisco Small Business SFE/SGE Managed Switches Administration Guide 102