Linksys SGE2000 Cisco Small Business SFE/SGE2xxx Series Managed Switches Admin - Page 99
Configuring Device Security, Edit Authentication Single, Multiple Host, Multi Session, Discard
UPC - 745883572120
View all Linksys SGE2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
Configuring Device Security Defining 802.1X Edit Authentication Page 4 The Edit Authentication Page contains the following fields: • Port - Displays the port number for which advanced port-based authentication is enabled. • Host Authentication- Defines the Host Authentication mode. The possible field values are: - Single - Only the authorized host can access the port. - Multiple Host - Multiple hosts can be attached to a single 802.1x- enabled port. Only one host must be authorized for all hosts to access the network. If the host authentication fails, or an EAPOL-logoff message is received, all attached clients are denied access to the network. - Multi Session - Enables number of specific authorized hosts to get access to the port. Filtering is based on the source MAC address. • Action on Violation - Defines the action to be applied to packets arriving in single-host mode, from a host whose MAC address is not the supplicant MAC address. The possible field values are: - Discard - Discards the packets. This is the default value. - Forward - Forwards the packet. - Shutdown - Discards the packets and shuts down the port. The ports remains shut down until reactivated, or until the device is reset. • Enable Traps - Indicates if traps are enabled for Multiple Hosts. The possible field values are: - Checked - Indicates that traps are enabled for Multiple hosts. - Unchecked - Indicates that traps are disabled for Multiple hosts. Cisco Small Business SFE/SGE Managed Switches Administration Guide 90