Linksys SGE2000 Cisco Small Business SFE/SGE2xxx Series Managed Switches Admin - Page 47
Supported IP Format, IPv6 Address Type, Configuring System Time, Add SNTP Server
UPC - 745883572120
View all Linksys SGE2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Configuring System Time Defining SNTP Settings 3 - Unknown - The progress of the SNTP information currently being sent is unknown. For example, the device is currently trying to locate an interface. • Status - The operating SNTP server status. The possible field values are: - Up - The SNTP server is currently operating normally. - Down - Indicates that a SNTP server is currently not available. For example, the SNTP server is currently not connected or is currently down. - Unknown - Indicates that the device (sntp client) is currently looking for sntp server. • Last Response - Indicates the last time a response was received from the SNTP server. • Offset - Indicates the difference in minutes between DST and the local standard time.The default time is 60 minutes. • Delay - Indicates the amount of time it takes to reach the SNTP server. STEP 2 Click the Add button. The Add SNTP Server Page opens: Add SNTP Server Page The Add SNTP Server Page contains the following fields: • Supported IP Format - Provides the supported IP format: Version 6 or Version 4. - IPv6 Address Type - Indicates the type of IP Address: Link Local or Global. • SNTP Server - The SNTP server's IP address. • Enable Poll Interval - Select whether or not the device polls the selected SNTP server for system time information. Cisco Small Business SFE/SGE Managed Switches Administration Guide 38